Am 24.02.2014 10:16, schrieb Michael Schnell:
GREAT !!!!
I do have an real ( :-) ) 68 K (in fact "Fido" based) Board sitting on
my desk which I work with every day.
I do development with same using GNU C via Eclipse and a JTAG adapter.
The embedded system does not run Linux but both a very propriety
non-preemptive (pure system mode) OS by Innovasic and a very propriety
preemptive (user mode) OS by myself.
Any chance to do some tests with your milestone on this system ?
We don't have an embedded target yet and for the two OS you mentioned
the RTL would need to be ported (or at least mostly stubbed). As you use
GNU C then the calling convention used should hopefully be the same as
for Linux though you might want to check whether it's using A6 or A5 as
stack frame register.
If you want to play with it nevertheless, the necessary parameters
should be -O- -Cp68000 (or maybe also 68020) and you'll need the
binutils for that target. You could for example compile a simple unit
that just contains functions/procedures (without managed types, no RTL
usage!) for m68k-linux (with the above mentioned parameters) and then
link the resulting .o file from a C program for the fido that calls the
functions (keep name mangling in mind or use "[public, alias:
'SomeName']" on the Pascal procedures/functions).
I know that sounds rather complex and restricted at the same time, but
for now that would be the only possibility if there is no port yet.
Regards,
Sven
_______________________________________________
fpc-devel maillist - [email protected]
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
