Hi. In AES1610 when I move too slow I get this segmentation fault. It's very difficult to get it to read. The scan time has to be adjusted for this sensor I believe.
Miguel Quoting Vasily Khoruzhick <[EMAIL PROTECTED]>: > On 23 November 2007 01:38:50 João Miguel Roque wrote: > >> Other thing is that the scan at least with the AES1610 doesn't have a >> good quality and maybe this is not only with the quality of the sensor, >> but also with the speed one must use when scaning the finger. If you >> scan too slow, it gives a segmentation fault. Don't know the internals >> of the program, but if possible, try to slow a bit the scan so that we >> can avoid this segmentation fault. Other thing could be to add in the >> demo a param that will do that, we the users will check the best speed >> for our sensors and then you could implement that speed in >> pam_fprint_enroll. > > It seems to me that segfault is a aes1610 driver issue. > As for aes2501 when I try to move finger too slow I get: > > aes2501:warning [capture] swiping finger too slow? > > Btw, please, post bug at http://www.reactivated.net/fprint/bugs/ > > Can someone with aes1610 check if this issue present? > > Regards > Vasily > _______________________________________________ fprint mailing list [email protected] http://lists.reactivated.net/mailman/listinfo/fprint
