Hello, the Cherry SmartTerminal with model-number SFR-1244U on the back (doesn't seem to be available on the web) is already supported by libfprint. The device itself functions as a USB-hub, containing a card-reader and a fingerpint-sensor with a chip from UPEK.
Looking on the German Cherry website <http://www.cherry.de/english/products/it_security.htm>, most devices with a fingerprint-sensor should be supported (AES4000, UPEK). Cheers, Niels == /proc/bus/usb/devices == T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 5 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0606 Rev= 7.02 S: Product=USB2.0 Hub C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms T: Bus=05 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046a ProdID=002d Rev= 2.03 S: Manufacturer=Cherry GmbH S: Product=SmartTerminal XX44 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=24ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=05 Lev=02 Prnt=05 Port=01 Cnt=02 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0483 ProdID=2015 Rev= 0.01 S: Manufacturer=TouchChip® S: Product=Fingerprint Reader C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=20ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms _______________________________________________ fprint mailing list [email protected] http://lists.reactivated.net/mailman/listinfo/fprint
