Well, I did make the correction to the typo, but it seems as though this list server doesn't support features such as text strikeout, colored or bold text. What a shame. At any rate, THIS TIME the sentence reads correctly. I'll repeat it here for clarity;
The electron beam in a CRT cannot illuminate individual pixels on the CRT face. It merely "brushes" across them, through what is known as a shadow mask, with a not-perfectly-defined beam size. Comment: Pixels as discussed in this manner, as you probably know, are actually made of three adjacent picture elements, each generating a different color: red, green and blue. This grouping of three elements comprises a triad, one pixel. When I say that a CRT cannot illuminate individual pixels, what I am saying is that with a CRT display, the illumination of individual pixels is not a perfect process. The dynamics of an analog interface/electron beam deflection system/shadow mask/phosphor CRT can only closely approximate what the video card wants it to display. Enough of this off-topic stuff. The whole point I was trying to make earlier is that the viewer's monitor type and display settings affects the readability of text just as much (I think) as the choice of fonts. We can only choose the latter. Any studies on screen readability need to take this into account. I suspect that if the display system is a good, high resolution display properly configured, serif fonts would continue to be preferable. With lesser quality displays, I suspect the opposite. Amazon's Kindle apparently uses both serif and sans serif fonts. Dennis... ************************************************************************************ At 03:30 PM 5/12/2008, Dennis Brunnenmeyer wrote: >In a very recent post, I included an unfortunate typographical error. >The sentence below has been corrected. > >Dennis... >*********************************************************************************** >At 12:41 PM 5/12/2008, Dennis Brunnenmeyer wrote: > >The electron beam in a CRT cannot illuminate individual pixels on >the CRT face. It merely "brushes" >across them, through what is known as a shadow mask, with a >not-perfectly-defined beam size. > >Dennis Brunnenmeyer >Cedar Ridge Systems. > >********************************************************* > >At 12:27 PM 5/12/2008, Kelly McDaniel wrote: > > >On the computer display, the characters and background are formed from > > >pixels. Pixels have smooth, parallel edges that enclose their color. > > >Sans serif fonts appear crispier on the display because the character > > >edge is more likely to mate with a pixel edge. > > > >Dennis Brunnenmeyer > >Director of Engineering > >CEDAR RIDGE SYSTEMS > >15019 Rattlesnake Road > >Grass Valley, CA 95945-8710 > >Office: (530) 477-9015 > >Fax: (530) 477-9085 > >Mobile: (530) 320-9025 > >eMail: dennisb /at/ chronometrics /dot/ com > >_______________________________________________ > > > > > >You are currently subscribed to Framers as dennisb at chronometrics.com. > > > >Send list messages to framers at lists.frameusers.com. > > > >To unsubscribe send a blank email to > >framers-unsubscribe at lists.frameusers.com > >or visit > >http://lists.frameusers.com/mailman/options/framers/dennisb%40chron > ometrics.com > > > >Send administrative questions to listadmin at frameusers.com. Visit > >http://www.frameusers.com/ for more resources and info. > >Dennis Brunnenmeyer >Director of Engineering >CEDAR RIDGE SYSTEMS >15019 Rattlesnake Road >Grass Valley, CA 95945-8710 >Office: (530) 477-9015 >Fax: (530) 477-9085 >Mobile: (530) 320-9025 >eMail: dennisb /at/ chronometrics /dot/ com >_______________________________________________ > > >You are currently subscribed to Framers as dennisb at chronometrics.com. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com > >Send administrative questions to listadmin at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. Dennis Brunnenmeyer Director of Engineering CEDAR RIDGE SYSTEMS 15019 Rattlesnake Road Grass Valley, CA 95945-8710 Office: (530) 477-9015 Fax: (530) 477-9085 Mobile: (530) 320-9025 eMail: dennisb /at/ chronometrics /dot/ com
