That?s a great idea! Thanks, Alison
From: rebecca officer [mailto:[email protected]] Sent: Sunday, April 21, 2013 5:29 PM To: Alison Craig; HelenBorrie; bodvar at gmail.com Cc: framers at lists.frameusers.com Subject: RE: Selecting Colours for Conditions Hi Alison We're dealing with something similar by using conditions with colored text for product variations and conditions wiith background shading for feature variations. You could give your short/advanced conditions background shading instead of colored text. Cheers Rebecca >>> Alison Craig <Alison.Craig at ultrasonix.com<mailto:Alison.Craig at >>> ultrasonix.com>> 20/04/13 04:39 >>> Thanks guys. Unfortunately, my original Conditions are for a very different purpose than what you describe. We have 5 different hardware platforms for our medical device, but a large portion of the book is common to all platforms. Currently, my Conditions cover the differences between the platforms ? and many times, the same info will pertain to only 1 or perhaps 2, 3 or 4 platforms, but not all five. By definition, those Conditions overlap. I am now having to devise Short and Advanced versions of the book. Up to 95% of this will be covered by the inclusion/exclusion of Chapters and Appendices in a new book, but a small amount of content within the book files themselves will have to conditionalized as Short or Advanced. I was hoping to save a little time, but I guess that?s not possible. As for overlapping Conditions ending up as magenta, I did have some of that problem, but I also had a problem with muddy blues and the khaki issue you mention. That?s why it took so long to determine the correct mix of colours in the first place ? especially as I used to cover 6 platforms in one book, not just the 5 I currently do. Alison From: framers-bounces at lists.frameusers.com<mailto:framers-bounces at lists.frameusers.com> [mailto:[email protected]] On Behalf Of B??var Bj?rgvinsson Sent: Friday, April 19, 2013 4:00 AM To: Helen Borrie Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com> Subject: Re: Selecting Colours for Conditions Great, Helen. Another way of doing it might have been to create colors under the names of the condition names: eOnly, Print1, etc. That way you would not have to remember any color names or to which condition each color applied. Cheers, Bodvar Bjorgvinsson [cid:image001.png at 01CE3F3B.372D0240] On Fri, Apr 19, 2013 at 4:28 AM, Helen Borrie <helebor at iinet.net.au<mailto:helebor at iinet.net.au>> wrote: At 09:17 a.m. 19/04/2013, Alison Craig wrote: >Content-Language: en-US >Content-Type: multipart/alternative; > > boundary="_000_17474827509158478EE10BC6B977A3E30CC5A15342exchangeultra_" > >FM 9 Version: 9.0p255 >Unstructured >OS: Windows 7, 64 bit > >Does anyone know if any kind of ?guide? exists regarding the best colours to >choose when creating Conditions? > >When I initially set up my Conditions, I spent a lot of time testing to see >how colours blended when I had multiple Conditions applied to the same text >(lots of combos ended up being virtually identical onscreen even though the >combination of underlying colours were quite different). It didn?t make sense >to use colours in the first place if I couldn?t tell where one combo stopped >and the next one started. > >I now have to add 2 new conditions (on a tight deadline) so I really don?t >have a lot of time to test things. If someone has put together some kind of >guide, I?d really love to see it ? if you?re willing to share. Recently I broke up a very large eBook into three volumes for print. It's the first time I've using conditionals seriously. I followed the advice in Sarah O'Keefe's book and avoided having overlapping conditions. I had to play around a bit until I got useful contrasts. The book said that FM would show all overlapping conditions as magenta so it would be a good idea to avoid assigning magenta to a particular condition. In fact, I never saw magenta at all; all the overlaps that I had in my initial scheme (subsequently abandoned) came through as a sort of khaki when I did the conditionals for the first chapter. That's when I decided Sarah was right and I should not try to piggyback the same conditions. The scheme I ended up with was five conditions: eOnly, printOnly, Print1, Print2 and Print3. (I have a navigation scheme built into the e-Version, which was not appropriate for the print books. The book will never have an omnibus print edition as it is waaaay too large.) I picked the brightest possible high-contrast colours for the five conditions (avoiding magenta by Sarah's advice and blue because the Silicon Prairie indexing tools use blue for index markers. I also avoided red because Fm8 seems to use it as a warning when conditions conflict in some way.) I think I had forest green for eOnly, green for Print1, cyan for Print2, salmon for Print3 and dark blue for printOnly. On thing I did find was that it is very easy to change the entire colour scheme. Once I had it pinned down, I just kept a card by me with the colours on it, so I didn't have to think about it when repeatedly swapping condition markers between {a colour} and {As Is}. HTH, maybe a little bit, anyway... Helen _______________________________________________ You are currently subscribed to framers as bodvar at gmail.com<mailto:bodvar at gmail.com>. Send list messages to framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com<mailto:framers-unsubscribe at lists.frameusers.com> or visit http://lists.frameusers.com/mailman/options/framers/bodvar%40gmail.com Send administrative questions to listadmin at frameusers.com<mailto:listadmin at frameusers.com>. Visit http://www.frameusers.com/ for more resources and info. NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130422/0f3930f1/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 4931 bytes Desc: image001.png URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130422/0f3930f1/attachment.png>
