Great suggestions, Fred, thanks! I don't recall if I dumbly failed to
choose the right selection tool. I'll reveal those lines and get rid
of 'em using your suggestions.
Thanks all,
Karen
At 3:57 AM +0000 8/30/16, Fred Ridder wrote:
First of all, you have to be using the right selection tool (the
graphic/multipurpose selection arrow on the graphics tool palette)
to be able to select them. And if the lines have been sent to the
back of the object stack, your attempts to select them will be
interpreted as applying to whatever is farther forward (e.g. the
table) rather than the lines, making selection.
There are a couple of approaches that could work to allow you to
manipulate (i.e. delete) the lines themselves:
1) Move the table downward in the flow so that the lines are
uncovered. One way to do this would be to temporarily insert a bunch
of returns in front of the table anchor symbol to push the table
down. Another approach might be to temporarily change the position
property of the table to top of next page.
2) Click and drag to draw a selection box large enough to enclose
the whole table and whatever lies underneath it. Then de-select the
entire table via its anchor to leave only the lines (and any other
garbage) selected. At that point you should be able to simply delete
them. Or you can bring the garbage objects to the front where they
can be seen and selected and deleted.
-FR
From: Karen Robbins <karendes...@gmail.com>
Sent: Monday, August 29, 2016 8:08 PM
To: Fred Ridder
Cc: framers@lists.frameusers.com
Subject: Re: [Framers] Can't remove lines apparently covered by table
Framers are the best! Yes, they probably were graphic lines drawn at
one time or another. Yes, setting cell fill to 100% white hides
them. Thanks!
Is that normal? Why can't the lines themselves be selected (to
delete or even change their color to white)?
--Karen
On Mon, Aug 29, 2016 at 2:43 PM, Fred Ridder
<<mailto:docu...@hotmail.com>docu...@hotmail.com> wrote:
Is it possible that you're seeing some lines that were drawn as
graphics (intentionally or unintentionally)? Try setting a 100%
white fill for the table rows in question and see if that make the
lines disappear.
-FR
From: Framers
<framers-bounces+docudoc=<mailto:hotmail....@lists.frameusers.com>hotmail....@lists.frameusers.com>
on behalf of Karen Robbins
<<mailto:karendes...@gmail.com>karendes...@gmail.com>
Sent: Monday, August 29, 2016 5:01 PM
To: <mailto:framers@lists.frameusers.com>framers@lists.frameusers.com
Subject: [Framers] Can't remove lines apparently covered by table
Hi framers,
In a detailed table some lines are visible in two rows (of 20+) that don't
seem to be column, row, or cell border lines. No rule above or below is set
for the nearest text. The lines do not align with the cells themselves, and
they are about the same weight as the cell borders. I can't get rid of the
lines--I can't even click them, even if I delete all the text in the cells
where they appear to be. If I "select all" on the table, these lines
disappear with the rest of the table. I've tried a handful of key
combinations to try to release the lines--group and ungroup commands are
grayed out--to no avail. How are these lines connected to the table? How
can I disconnect and get rid of them? Obviously I do not want to rebuild
and re-key the table.
Thanks so much,
Karen
_______________________________________________
This message is from the Framers mailing list
Send messages to framers@lists.frameusers.com
Visit the list's homepage at http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com