Hi Dan, I also have FM 2019 64 bit and could not install SetPrint. However, I think it's not needed any longer (only, if you want to print to a file). If you create a PDF via Save As PDF or via the Publish pod (with Use Acrobat Distiller for PDF generation activated), the PDF is created correctly. I do not notice any difference, when the printer is set to a physical printer or to Adobe PDF.
When you create the PDF without Distiller, then you do not need SetPrint anyway. I also have some issues when FrameMaker creates the PDF. I hope that this gets fixed soon! Best regards Winfried -----Original Message----- From: Framers <framers-bounces+w.reng=carecom-solutions....@lists.frameusers.com> On Behalf Of Harding, Dan Sent: Thursday, March 28, 2019 5:00 PM To: [email protected] Subject: [Framers] PDFs and FM 2019 ... 1. Sundorne's Setprint no longer appears to work, presumably because it was a 32-bit application and is incompatible with 64-bit FM. Is there a 64-bit version of that utility or some other method to always set the printer to Adobe PDF whenever opening a document? The error I receive is as follows: ... 2. More of an FYI than an issue: By default, FrameMaker 2019 is configured to NOT use Acrobat Distiller to create PDFs... why I have no idea. When I used the default config, my PDFs had all sorts of missing elements throughout the document... placed graphics, running feet, you name it. It was only when I checked the box to use Distiller that I got fully intact PDFs. _______________________________________________ This message is from the Framers mailing list Send messages to [email protected] Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to [email protected]
