Fascinating! On Thursday, July 31, 2014, FCO. JAVIER HURTADO MOMPEO <[email protected]> wrote:
> I would like to make the following technical consultation; > > > My name is Xavi Hurtado working in independent video and > > with 16 mm ephemeral latinamerican found footage film. > > > I'm modifying a 16mm EIKI film projector with an engineer for working in > alive film performance; > > my most important idea is to become independent the shutter operation > placing a engin > > that would control the shutter operation with diferent speeds. > > But I don´t wan t simply to speed up or down the shutter > > (independently from the main engine operation, the one which which moves > the film ) > > > I would like to change the time duration for black (obstruction of > light) and the time duration to show the image. > > (I'm not sure if I'm explaining well or enough acurately in English) > > > My idea to get that; was to work with two independent shutters, drived > by two diferent motors. > > The black area of each shutter could be as a black half moon > > and the thing is that I would like to put both shutters in the same axis as > > I said driving them with diferent motors (step motors probably) . > > > I think that way It could be controled separately the speed of the > shutter (of both shutters) > > from the amount of black obstruction of ligth and from the amount of light > flow. > > > Which could be achieve through more or less light; moving synchronously > the two half moon shutters with separate two motors. > > > At this point the engineer thinks that would be practically > > the same effect that to work with only one shutter (with tree slots) at > diferent speeds > > > Anybody can advise me? > > What do you think about that... > > there would be really an insignificant diference between one or two > shutters? > > > Or the posibilities of the idea are a sufficient promise to try to > buid the two shutters ? > > > On the other hand before I build a hardware and a software that controls > the power intensity > > of the lamp and the speed of the main engine of another EIKI 16mm > projector depending on > > the frequency or the volumen of an input sound (also is posible to control > those projector > > parameters from a graphic interface in the computer made with Max).. and > it Works > > > but now I also wants to control the shutter. > > Thanks > > Xavi Hurtado > > > Aquest correu electrònic i els annexos poden contenir informació > confidencial o protegida legalment i està adreçat exclusivament a la > persona o entitat destinatària. Si no sou el destinatari final o la persona > encarregada de rebre’l, no esteu autoritzat a llegir-lo, retenir-lo, > modificar-lo, distribuir-lo, copiar-lo ni a revelar-ne el contingut. Si heu > rebut aquest correu electrònic per error, us preguem que n’informeu al > remitent i que elimineu del sistema el missatge i el material annex que > pugui contenir. Gràcies per la vostra col·laboració. > > Este correo electrónico y sus anexos pueden contener información > confidencial o legalmente protegida y está exclusivamente dirigido a la > persona o entidad destinataria. Si usted no es el destinatario final o la > persona encargada de recibirlo, no está autorizado a leerlo, retenerlo, > modificarlo, distribuirlo, copiarlo ni a revelar su contenido. Si ha > recibido este mensaje electrónico por error, le rogamos que informe al > remitente y elimine del sistema el mensaje y el material anexo que pueda > contener. Gracias por su colaboración. > > This email message and any documents attached to it may contain > confidential or legally protected material and are intended solely for the > use of the individual or organization to whom they are addressed. We remind > you that if you are not the intended recipient of this email message or the > person responsible for processing it, then you are not authorized to read, > save, modify, send, copy or disclose any of its contents. If you have > received this email message by mistake, we kindly ask you to inform the > sender of this and to eliminate both the message and any attachments it > carries from your account. Thank you for your collaboration. > >
_______________________________________________ FrameWorks mailing list [email protected] https://mailman-mail5.webfaction.com/listinfo/frameworks
