I have used these times with success with the Arkay G-3 (or Morse) processing
Tanks for processing b&w reversal films:
Winding continuously, a 100-foot roll should pass from one reel to the other in
approximately one minute. All solutions and rinses should be as close to 68
degrees F (20 degrees C) as possible.
Pre-bath 4 min.
First developer 20 min. for Plus X
18 min. for Tri-X
Rinse 4 min.
Bleach 15 min.
Rinse 4 min.
Clearing Bath 10 min.
Rinse 10 min.
Re-expose simultaneously after 1 pass through rinse water, remove cover and
rotate reels by hand allowing several passes while exposed to 90 w light @ 12
inches. Use continuous running water.
Redeveloper 9 min.
fix, rinse, wash, photo flo
Of course you may have to make adjustments for your situation after doing some
tests.
Janis Crystal Lipzin
_______________________________________________
FrameWorks mailing list
[email protected]
https://mailman-mail5.webfaction.com/listinfo/frameworks
