The one I have has the three screws and the firing knob that all came lose
when I unscrewed them. But Still nothing came undone. If you'd like, I can do a
video of what I'm taking apart and show you what is what.
On Tuesday, May 26, 2020, 10:49:42 PM EDT, Todd Eacrett
<[email protected]> wrote:
#yiv7666606517 p.yiv7666606517MsoNormal, #yiv7666606517
p.yiv7666606517MsoNoSpacing{margin:0;}
Weird. The two I have are slightly different, but both are tethered to the case
in the same way. With the screws removed is the mechanism loose within the case
or still solidly attached? I'm not a camera technician so I don't recommend
prying with a screwdriver, but it has worked for me.
On Tue, May 26, 2020, at 3:43 PM, Morgan Hoyle-Combs wrote:
Already tried it. Screws, knob, meter reel and all. Something else is keeping
it grounded to the body.
On Tuesday, May 26, 2020, 4:32:07 PM EDT, Todd Eacrett <[email protected]>
wrote:
In addition to the three screws on the back of the case, you need to remove the
shutter release knob and the footage counter (top of the case). The latter has
a spring washer under it, so don't lose it. The mechanism should slide/wiggle
out as one unit, but if the case is bent or dented it could hang up on the
edges. You can clean and lube easily without further disassembly; I think I
basically soaked the entire mech in solvent.
On Tue, May 26, 2020, at 10:16 AM, Morgan Hoyle-Combs wrote:
I was abe to loosen the bolts that held the camera mechanism in place, but was
unable to get the mechanism out. There was still something holding it on there.
I didn't want to take any chances by forcing it, so I put everything back in
place. If someone out there has the ability and tools to remove the mechanism
and oil down the gears while there at it, then thats all I would like completed.
M
_______________________________________________
FrameWorks mailing list
[email protected]
https://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________
FrameWorks mailing list
[email protected]
https://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________
FrameWorks mailing list
[email protected]
https://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________
FrameWorks mailing list
[email protected]
https://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________
FrameWorks mailing list
[email protected]
https://mailman-mail5.webfaction.com/listinfo/frameworks
