On 5 April 2010 03:22, Ian Smith <smi...@nimnet.asn.au> wrote: > Constantine, I've dropped freebsd-drivers and freebsd-hardware from ccs, > I'm not subscribed. Please re-add if it's useful, or ignore if not :)
Ian, should you have used a mailer with support for Mail-Followup-To, you wouldn't have to do that manually. :-) > On Mon, 5 Apr 2010, Constantine A. Murenin wrote: > [..] > > * the supposed range specifications are now reported for each input that > is > > being sensed > [..] > > > sudo kldload aibs.ko > > > sysctl hw.acpi.aibs0 > > hw.acpi.aibs0.volt.0: 1192 850 1600 > > hw.acpi.aibs0.volt.1: 3312 2970 3630 > > hw.acpi.aibs0.volt.2: 5017 4500 5500 > > hw.acpi.aibs0.volt.3: 12302 10200 13800 > > I'm curious about these. Are the high and low ranges being reported by > the device/s, or from specifications? At least 3.3 and 5.0V specs are > more commonly +/-5%, these are +/-10%, and the 12V range is +/-15%! This is what ASUSTeK has in the ACPI DSDT of the specific motherboard where the test was run. > > hw.acpi.aibs0.temp.0: 31.0C 80.0C 95.0C > > hw.acpi.aibs0.temp.1: 58.0C 60.0C 95.0C > > Obviously the 95C are maxima, but what do the 80C and 60C represent? It's all documented in the manual page for aibs(4) — two upper limits for temperatures are provided. On OpenBSD, DragonFly and NetBSD, readings above these values generate WARN and CRIT states. > > hw.acpi.aibs0.fan.0: 907 600 7200 > > hw.acpi.aibs0.fan.1: 0 700 7200 > > > sysctl -d hw.acpi.aibs0 > > hw.acpi.aibs0: ASUSTeK AI Booster (ACPI ASOC ATK0110) > > hw.acpi.aibs0.volt.0: Vcore Voltage > > hw.acpi.aibs0.volt.1: +3.3 Voltage > > hw.acpi.aibs0.volt.2: +5 Voltage > > hw.acpi.aibs0.volt.3: +12 Voltage > > hw.acpi.aibs0.temp.0: CPU Temperature > > hw.acpi.aibs0.temp.1: MB Temperature > > hw.acpi.aibs0.fan.0: CPU FAN Speed > > hw.acpi.aibs0.fan.1: CHASSIS FAN Speed > > > sudo kldunload aibs.ko > > > > > > Best regards, > > Constantine.SU. > > cheers, Ian br, cnst.su. _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"