Thank Bykov Vladislav and Kevin Oberman's recommendations. Later I received an 

immediately compile the kernel (make a note #options VESA).But the problem 
persists, dmesg 

Information Reference url 


Even worse thing is, I do use "acpiconf -s 3"debugger, resulting in a notebook 
can not boot 

until yesterday afternoon for a good notebook motherboard, now do not dare to 
use “acpiconf 

-s 3” testing. 


Do you have suggestions for me? Thanks you~




发件人: Bykov Vladislav [] 
发送时间: 2014年8月13日 0:13
收件人: 张晓靖
主题: Re: My laptop can't resume from suspend.


On Tue, Aug 12, 2014 at 12:20:28PM +0800, 张晓靖 wrote:

> The laptop can't resume, the screen no display, no beep sound. 

Can you please try to install video driver for your card and remove VESA device 
from kernel configuration?



发件人: [] 代表 Kevin Oberman
发送时间: 2014年8月13日 1:15
收件人: 张晓靖
主题: Re: My laptop can't resume from suspend.


On Mon, Aug 11, 2014 at 9:20 PM, 张晓靖 < 
<> > wrote:


       I am having a problem.

       My laptop is lenovo's zhaoyang K47A series HM65.

       I used ati graphics CARDS, Use the url (
<> the
method of normal driving the graphics card.

      After set "

sysctl debug. Bootverbose = 1

sysctl debug. Acpi. Suspend_bounce = 1

sysctl debug. Acpi. Resume_beep = 1

acpiconf -s 3


The laptop can't resume, the screen no display, no beep sound.

Disabling ACPI not helps to fix the problem. All files downloaded from

Output from sysctl hw.acpi

hw.acpi.supported_sleep_state: S1 S3 S4 S5

hw.acpi.power_button_state: S5

hw.acpi.sleep_button_state: S1

hw.acpi.lid_switch_state: NONE

hw.acpi.standby_state: S1

hw.acpi.suspend_state: S3

hw.acpi.sleep_delay: 1

hw.acpi.s4bios: 0

hw.acpi.verbose: 1

hw.acpi.disable_on_reboot: 0

hw.acpi.handle_reboot: 0

hw.acpi.reset_video: 0

hw.acpi.cpu.cx_lowest: C1

hw.acpi.acline: 1 100

hw.acpi.battery.time: -1

hw.acpi.battery.state: 0

hw.acpi.battery.units: 2

hw.acpi.battery.info_expire: 5

hw.acpi.thermal.min_runtime: 0

hw.acpi.thermal.polling_rate: 10

hw.acpi.thermal.user_override: 0

hw.acpi.thermal.tz0.temperature: 62.0C -1

hw.acpi.thermal.tz0.passive_cooling: 1

hw.acpi.thermal.tz0.thermal_flags: 0

hw.acpi.thermal.tz0._PSV: 95.0C

hw.acpi.thermal.tz0._HOT: -1

hw.acpi.thermal.tz0._CRT: 100.0C

hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1

hw.acpi.thermal.tz0._TC1: 2

hw.acpi.thermal.tz0._TC2: 3

hw.acpi.thermal.tz0._TSP: 100



Have you tried building the kernel without VESA? Many laptops won't resume if 
you leave VESA in the kernel build. 


R. Kevin Oberman, Network Engineer, Retired
E-mail: <> 

_______________________________________________ mailing list
To unsubscribe, send any mail to ""

Reply via email to