Hello, I've built up a NAS system with the following hardware:
- Mainboard: ASUS B150M-K D3 LGA1151 - CPU: Intel BX80662G4400 Prozessor - RAM: 2x 8GB Kingston ValueRAM DDR3-1600 DIMM CL11 Single As OS I'm using FreeNAS V9.10 that is based on FreeBSD. I'm using this OS, because it provides the possibility to encrypt my data. Therefore it is necessary to enter a passphrase to unlock my hard drives after each reboot. Since I don't want to run the NAS all time and I don't want to enter the passphrase for each access, the suspend to RAM mode is very important for me. And here is my problem: When I execute the command "acpiconf -s 3" the system is starting to suspend. However after a while (just a few seconds) the system is rebooting (ASUS boot screen is displayed) and I have to type in the passphrase again. I already tried to fix this with your description from chaptor "11.16.3.5 System Powers Up After Suspend or Shutdown", but without success. I attached some logs. I thing the names are self-explanatory. The ACPI Source Language file can be found here: https://dl.dropboxusercontent.com/u/17336975/root-ASUSB150M-KD3LGA1151.asl If you need further logs or information, please contact me. Thank you very much in advance. Best regards, Michael
dmesgWithAcpi.output
Description: Binary data
sysctlHwAcpi.output
Description: Binary data
_______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "[email protected]"
