Maksim Yevmenkin wrote:
Hello,
I've just bought a Bluesoleil bluetooth dongle and I'm having problems
with it right from the start.
I kldload-ed ng-ubt.ko.
After plugging the USB dongle in my computer it says:
ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73 addr 2
ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73 addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, buffer size=294
ubt_request_complete2: ubt0 - Control request failed. STALLED (17)
ubt_request_complete2: ubt0 - Control request failed. STALLED (17)
ubt_request_complete2: ubt0 - Control request failed. STALLED (17)
well, this points to usb and/or device itself, not bluetooth.
basically the driver is trying to send control request to the device
and it stalled. try different usb port and/or try to disable ehci usb
and revert back to uhci (or ohci).
a couple of times and then everything stops and no bluetooth device
appears in /dev.
there won't be any entires in /dev for bluetooth devices. only netgraph nodes.
thanks,
max
I was using UHCI already.
The error still appears...but I don't quite get it...if I issue:
hccontrol -n ubt0hci inquiry
(like the handbook says)
I can very easily see my mobile phone and my keyboards' bluetooth hub.
I can also use:
hccontrol -n ubt0hci remote_name_request
and it works..but the error appears 1 or 2 times for each command I issue.
What could be causing this ?
Do I need to set(increase) some sort of a timeout ?
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bluetooth
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
