Maksim Yevmenkin wrote:
On 7/30/07, Mihai Tanasescu <[EMAIL PROTECTED]> wrote:
Maksim Yevmenkin wrote:
Hello,
I've just bought a Bluesoleil bluetooth dongle and I'm having problems
with it right from the start.
I kldload-ed ng-ubt.ko.
After plugging the USB dongle in my computer it says:
ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73 addr 2
ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73 addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, buffer size=294
ubt_request_complete2: ubt0 - Control request failed. STALLED (17)
ubt_request_complete2: ubt0 - Control request failed. STALLED (17)
ubt_request_complete2: ubt0 - Control request failed. STALLED (17)
well, this points to usb and/or device itself, not bluetooth.
basically the driver is trying to send control request to the device
and it stalled. try different usb port and/or try to disable ehci usb
and revert back to uhci (or ohci).
a couple of times and then everything stops and no bluetooth device
appears in /dev.
there won't be any entires in /dev for bluetooth devices. only netgraph nodes.
I was using UHCI already.
The error still appears...but I don't quite get it...if I issue:
i see
hccontrol -n ubt0hci inquiry
(like the handbook says)
I can very easily see my mobile phone and my keyboards' bluetooth hub.
I can also use:
hccontrol -n ubt0hci remote_name_request
and it works..but the error appears 1 or 2 times for each command I issue.
that tells me that bluetooth part works fine, *when* communication
between host (pc) and bluetooth dongle works
What could be causing this ?
Do I need to set(increase) some sort of a timeout ?
all i can say at this point is that there is seems to be something
wrong with usb part. for whatever reason communication (via usb bus)
between host (pc) and bluetooth dongle is flaky. it is clearly not a
timeout issue, so you can not fix it by changing timeout.
can you please send
1) uname -a
2) dmesg output
3) usbdevs -dv output with bluetooth dongle attached
you can also try to use different usb port (if available). if you use
usb hub, try without it. if your dongle has extension usb cable, try
shorter (or no) extension cable. finally, if possible try another
dongle (preferably different brand).
thanks,
max
Don't shoot but I had some errors in hcsecd.conf and that's why I was
getting those control request failures.
Now everything works fine and it connects with my phone.
I've just spent a couple of hours getting gnokii to work with it, but
after disabling the rfcomm option and specifying AT mode everything went
on smoothly.
Sorry for the trouble and thanks for the help.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bluetooth
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
