https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=289092
--- Comment #3 from Pascal Fabbri <[email protected]> --- ----------- System boot ----------- Loading kernel... /boot/kernel/kernel text=0x180078 text=0xd979c8 text=0x43a48b data=0x180+0xe80 data=0x1875d0+0x478a30 0x8+0x18e988+0x8+0x1b2b64 Loading configured modules... /etc/hostid size=0x25 /boot/kernel/cryptodev.ko size 0x7808 at 0x2142000 /boot/entropy size=0x1000 /boot/kernel/zfs.ko size 0x5e9328 at 0x214b000 /boot/kernel/amdtemp.ko size 0x7618 at 0x2735000 loading required module 'amdsmn' /boot/kernel/amdsmn.ko size 0x36e0 at 0x273d000 ---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.3-RELEASE-p2 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: AMD G-T40E Processor (1000.03-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x500f20 Family=0x14 Model=0x2 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=8 TSC: P-state invariant, performance statistics real memory = 4815060992 (4592 MB) avail memory = 4077740032 (3888 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <CORE COREBOOT> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd0 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf2570-0x --------------- some more lines --------------- Root mount waiting for: usbus1 usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Western Digital My Passport 25E1 (0x1058:0x25e1) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Western Digital My Passport 25E1 (0x1058:0x25e1) usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Western Digital My Passport 25E1 (0x1058:0x25e1) usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Western Digital My Passport 25E1 (0x1058:0x25e1) ugen1.2: <Western Digital My Passport 25E1> at usbus1 umass1 on uhub5 umass1: <Western Digital My Passport 25E1, class 0/0, rev 2.10/10.21, addr 2> on usbus1 umass1: SCSI over Bulk-Only; quirks = 0xc005 umass1:7:1: Attached to scbus7 da1 at umass-sim1 bus 1 scbus7 target 0 lun 0 da1: <WD My Passport 25E1 1021> Fixed Direct Access SPC-4 SCSI device da1: Serial Number 575854314141384E59503158 da1: 40.000MB/s transfers da1: 1907697MB (3906963456 512 byte sectors) da1: quirks=0x2<NO_6_BYTE> Root mount waiting for: usbus1 CAM da ses0 at umass-sim1 bus 1 scbus7 target 0 lun 1 ses0: <WD SES Device 1021> Fixed Enclosure Services SPC-4 SCSI device ses0: Serial Number 575854314141384E59503158 ses0: 40.000MB/s transfers ses0: SES Device GEOM: da1: corrupt or invalid GPT detected. GEOM: da1: GPT rejected -- may not be recoverable. usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Seagate Expansion (0x0bc2:0x231a) Root mount waiting for: usbus1 Root mount waiting for: usbus1 usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Seagate Expansion (0x0bc2:0x231a) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Seagate Expansion (0x0bc2:0x231a) usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Seagate Expansion (0x0bc2:0x231a) usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Seagate Expansion (0x0bc2:0x231a) ugen1.3: <Seagate Expansion> at usbus1 umass2 on uhub5 umass2: <Seagate Expansion, class 0/0, rev 2.10/7.10, addr 3> on usbus1 umass2: SCSI over Bulk-Only; quirks = 0xc005 umass2:8:2: Attached to scbus8 da2 at umass-sim2 bus 2 scbus8 target 0 lun 0 da2: <Seagate Expansion 0710> Fixed Direct Access SPC-4 SCSI device da2: Serial Number NAAR6EBF da2: 40.000MB/s transfers da2: 1907729MB (3907029167 512 byte sectors) da2: quirks=0x2<NO_6_BYTE> GEOM: da2: the primary GPT table is corrupt or invalid. GEOM: da2: using the secondary instead -- recovery strongly advised. Dual Console: Serial Primary, Video Secondary intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 re0: link state changed to UP re1: link state changed to DOWN re2: link state changed to DOWN lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP ----------------------------------------------- Up to this point the serial console works fine, but it stops working right here. Then, when I interrupt the system from an SSH session using the shutdown -p command, the messages resume on the console. ----------------------------------------------- All buffers synced. Uptime: 1m56s umass0: detached uhub1: detached ugen5.2: <Generic Flash Card Reader/Writer> at usbus5 umass0 on uhub3 umass0: <Generic Flash Card Reader/Writer, class 0/0, rev 2.00/1.00, addr 2> on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x4001 umass0:6:0: Attached to scbus6 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 01 83 00 fc 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 01 83 00 fc 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 01 83 00 fc 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain (da0:umass-sim0:0:0:0): got CAM status 0x40a (da0:umass-sim0:0:0:0): fatal error, failed to attach to device umass0: detached uhub3: detached uhub2: detached uhub6: detached uhub5: detached umass1: detached umass2: detached uhub4: detached usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Western Digital My Passport 25E1 (0x1058:0x25e1) ugen0.2: <Western Digital My Passport 25E1> at usbus0 umass0 on uhub0 umass0: <Western Digital My Passport 25E1, class 0/0, rev 2.10/10.21, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8000 umass0:6:0: Attached to scbus6 da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 da0: <WD My Passport 25E1 1021> Fixed Direct Access SPC-4 SCSI device da0: Serial Number 575854314141384E59503158 da0: 1.000MB/s transfers da0: 1907697MB (3906963456 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ses0 at umass-sim0 bus 0 scbus6 target 0 lun 1 ses0: <WD SES Device 1021> Fixed Enclosure Services SPC-4 SCSI device ses0: Serial Number 575854314141384E59503158 ses0: 1.000MB/s transfers ses0: SES Device usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Seagate Expansion (0x0bc2:0x231a) ugen0.3: <Seagate Expansion> at usbus0 umass1 on uhub0 umass1: <Seagate Expansion, class 0/0, rev 2.10/7.10, addr 3> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0x8000 umass1:7:1: Attached to scbus7 umass0: detached (probe0:umass-sim1:1:0:0): INQUIRY. CDB: 12 01 83 00 fc 00 (probe0:umass-sim1:1:0:0): CAM status: CCB request completed with an error (probe0:umass-sim1:1:0:0): Retrying command, 3 more tries remain (probe0:umass-sim1:1:0:0): INQUIRY. CDB: 12 01 83 00 fc 00 (probe0:umass-sim1:1:0:0): CAM status: CCB request completed with an error (probe0:umass-sim1:1:0:0): Retrying command, 2 more tries remain (da0:umass-sim1:1:0:0): got CAM status 0x40a (da0:umass-sim1:1:0:0): fatal error, failed to attach to device umass1: detached uhub0: detached re0: link state changed to DOWN re0: link state changed to UP acpi0: Powering system off ----------------------------------------------- Here are the last messages that appear on the serial console. ----------------------------------------------- - The hardware is an APU3: https://www.pcengines.ch/apu2.htm - I would like to point out that the serial console had been working at least since FreeBSD 8.0 and up to FreeBSD 13.5. Thank you very much for your help. -- You are receiving this mail because: You are the assignee for the bug.
