Ian Whalley writes:
>
> The problem springs, I think, from confusion between (Intellimouse) and
> (!Intellimouse). The box pretends to be an Intellimouse even when you
> don't have one [or this is what seems to happen in my case], and so
> FreeBSD detects that you have an Intellimouse. However, then it all
> goes wrong, and I don't really know why!
>
My mouse is always detected as a MouseMan+. Here is couple dmesg logs
from boots with and without monitor switch.
Tomppa
--- monitor switch installed ---
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:ffffffff
psm: status ffffffff c030bee4 c07c14c0
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 10 00 64
psm: data c8 c6 51
psm: data 08 00 00
psm: status 00 03 64
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000100, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
sc0: fb0 kbd0
psm0: failed to get status (doopen).
--- monitor switch installed ---
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 10 00 64
psm: data c8 c6 51
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000100, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
sc0: fb0 kbd0
--- monitor switch NOT installed ---
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 10 00 64
psm: data c8 c6 51
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000100, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
sc0: fb0 kbd0
--
Sun Microsystems Oy PL 102, Niittymäentie 9, 02201 Espoo, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED] +358 9 52556252 fax
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
