I have just started to play with the Mylex Controler and I get
"attempt to write beyond end of drive"
When trying to write to the drive.
mlx0: <Mylex version 3 RAID interface> irq 15 at device 10.0 on pci0
mlx0: Mylex DAC960P/PD, 1 channel, firmware 3.51, 4MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 4040MB (8273920 sectors), RAID 5 (online)
I did the following to prep it
dd if=/dev/zero of=/dev/rmlxd0 bs=1k count=1
disklabel -Brw mlxd0 auto
newfs /dev/rmlxd0e
Oct 22 15:57:28 slag2a /kernel: t to write beyond end of drive
Oct 22 15:57:28 slag2a /kernel: mlx0: I/O error - attempt to write beyond
end of drive
Oct 22 15:57:57 slag2a last message repeated 529 times
Oct 22 15:57:59 slag2a /kernel: t to write beyond end of drive
Oct 22 15:57:59 slag2a /kernel: mlx0: I/O error - attempt to write beyond
end of drive
FreeBSD 4.0-CURRENT #0: Thu Oct 21 09:37:02 EDT 1999
The array consists of 5 segate drives that were working fine with the
MegaRAID controller.
---Mike
------------------------------------------------------------------------
Mike Tancsa, tel 01.519.651.3400
Network Administrator, [EMAIL PROTECTED]
Sentex Communications www.sentex.net
Cambridge, Ontario Canada
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
