kernel source cvsup'd within the last hour..
world from 991101
Preloaded elf module "linux.ko" at 0xc03bf2cc.
Preloaded elf module "atapi.ko" at 0xc03bf36c.
link_elf: symbol atapi_drvtab undefined
Intel Pentium detected, installing workaround for F00F bug
VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c7a88 (c0007a88)
VESA: Copyright 1994 TRIDENT MICROSYSTEMS INC.
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 1.0 on pci0
devclass_alloc_unit: npx0 already exists, using next available unit number
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 1.1 on pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 0 at device 1.2 on pci0
uhci0: could not map ports
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> at device 1.3 on pci0
vga-pci0: <Trident model 9660 VGA-compatible display device> at device 2.0 on pci0
pcic-pci0: <TI PCI-1220 PCI-CardBus Bridge> irq 10 at device 3.0 on pci0
pcic-pci1: <TI PCI-1220 PCI-CardBus Bridge> irq 10 at device 3.1 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <TOSHIBA MK4006MAV>
wd0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at port 0x170-0x177 irq 15 on isa0
wdc1: unit 0 (atapi): <UJDA110/1.05>, removable, accel, dma, iordy
wcd0: drive speed 2416KB/sec, 128KB cache
wcd0: supported read types: CD-DA
wcd0: Audio: play, 16 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: no/blank disc inside, unlocked
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <VLSI 82C146> at irq 10 on isa0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
unknown0: <ESS ES1869 Plug and Play AudioDrive> at port 0x800-0x807 on isa0
pcm0: <ESS1869> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
unknown1: <ESS ES1869 Plug and Play AudioDrive> at port 0x201 on isa0
Mounting root from ufs:/dev/wd0s1a
pccard: card inserted, slot 0
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0680c04
stack pointer = 0x10:0xc03d3f08
frame pointer = 0x10:0x2a94
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = none
#
# ROADWARRIOR -- Laptop machine with ide/usb/pcmcia/tools
#
# $Id: ROADWARRIOR,v 1.143.3.0.1 1999/11/03 21:15:00 techie Exp $
machine "i386"
cpu "I586_CPU"
cpu "I686_CPU"
ident ROADWARRIOR
maxusers 30
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
## options from LINT
options MD5
options PERFMON
options NETATALK
options ICMP_BANDLIM
options PCIC_RESUME_RESET
options MROUTING # Multicast routing
options COMPAT_LINUX
options POWERFAIL_NMI
options INCLUDE_CONFIG_FILE
options DDB
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpf)
controller isa0
controller pnp0
controller eisa0
controller pci0
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
controller wdc0 at isa? port IO_WD1 irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port IO_WD2 irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
device wcd0 #IDE CD-ROM
# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa? port ? conflicts
pseudo-device splash
device sc0 at isa?
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
device npx0 at isa? port IO_NPX irq 13
device apm0 at nexus? flags 0x31 # Advanced Power Management
# PCCARD (PCMCIA) support
device pcic0 at isa?
device pcic1 at isa?
controller card0
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? port? flags 0x40 irq 7
controller ppbus0 # Parallel port bus (required)
device lpt0 # Printer
device plip0 # TCP/IP over parallel
device ppi0 # Parallel port interface device
#controller vpo0 # Requires scbus and da0
controller miibus0
device ep0
device ed0 at isa? port 0x320 irq 11 conflicts iomem 0xd8000
# audio
device pcm0
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 4
pseudo-device pty 64
pseudo-device gzip # Exec gzipped a.out's
pseudo-device bpf 4 # Berkeley packet filter
pseudo-device snp
# USB support
controller uhci0 # UHCI PCI->USB interface
controller usb0 # USB Bus (required)
device ugen0 # Generic
device uhid0 # "Human Interface Devices"
device ukbd0 # Keyboard
device ulpt0 # Printer
#controller umass0 # Disks/Mass storage - Requires scbus and da0
device ums0 # Mouse
-- Welcome My Son, Welcome To The Machine --
Bob Vaughan | [EMAIL PROTECTED] | [EMAIL PROTECTED]
| [EMAIL PROTECTED] | KC6SXC@W6YX.#NCA.CA.USA.NOAM
| P.O. Box 9792, Stanford, Ca 94309-9792
-- I am Me, I am only Me, And no one else is Me, What could be simpler? --
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
