On Saturday 09 February 2013 09:47:46 Ian FREISLICH wrote:
> Hans Petter Selasky wrote:
> > On Friday 08 February 2013 22:43:17 Ian FREISLICH wrote:
> > > Hans Petter Selasky wrote:
> > > > Hi,
> > > > 
> > > > Your problem should be fixed by:
> > > > http://svnweb.freebsd.org/changeset/base/246565
> > > > 
> > > > Please test and report back if it doesn't.
> > > 
> > > It doesn't panic anymore.  Thanks.  There's a new problem though:
> > > 
> > > uath0: <Atheros Communications Inc USB WLAN Device, rev 2.00/0.01, addr
> > > 5> on usbus1 wlan1: Ethernet address: 00:11:95:d3:4a:af
> > 
> > Hi,
> > 
> > Can you try this patch:
> > http://svnweb.freebsd.org/changeset/base/246570
> 
> ugen1.5: <Atheros Communications Inc> at usbus1
> <Atheros Communications Inc USB WLAN Device, rev 2.00/0.01, addr 5> on
> usbus1 Ethernet address: 00:11:95:d3:4a:af
> uath_cmdsend: empty inactive queue
> could not init Tx queues, error 55
> uath_cmdsend: empty inactive queue
> could not set channel, error 55
> uath_cmdsend: empty inactive queue
> could not set channel, error 55
> uath_cmdsend: empty inactive queue
> could not set channel, error 55
> uath_cmdsend: empty inactive queue
> could not set channel, error 55
> uath_cmdsend: empty inactive queue
> could not set channel, error 55
> at uhub2, port 2, addr 5 (disconnected) <---
> uath_cmdsend: empty inactive queue
> uath_cmdsend: empty inactive queue
> ugen1.5: <Atheros Communications Inc> at usbus1 (disconnected)
> 
> The card still disconnects after attempting to scan unsupported
> frequencies.  The sequence above happens when I 'ifconfig wlan1
> up'.  Also, the uath driver reports 2.4GHz and 5GHz as supported
> channels for this chip but it's a D-Link DWL-G132 which is a 2.4GHz
> device.  Is this a problem for Adrian to look at?

Hi,

I see the same over here. I think it is not a USB problem.

--HPS
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Reply via email to