Hi, I got one problem when I unplug/plug "Buffalo WLI-UC-GNM", it is USB WLAN. All USB devices become to disconnected after unplug and plug:
ugen0.9: <Ralink> at usbus0 run0: <1.0> on usbus0 run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 4c:e6:76:d4:c9:5e wlan0: Ethernet address: 4c:e6:76:d4:c9:5e run0: firmware RT2870 ver. 0.33 loaded wlan0: link state changed to UP ugen0.9: <Ralink> at usbus0 (disconnected) run0: at uhub0, port 1, addr 8 (disconnected) wlan0: link state changed to DOWN xhci0: Port routing mask set to 0x00000000 usb_alloc_device: device init 9 failed (USB_ERR_IOERROR, ignored) ugen0.9: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device ugen0.2: <Logitech> at usbus0 (disconnected) ums0: at uhub0, port 5, addr 1 (disconnected) ugen0.3: <Apple Inc.> at usbus0 (disconnected) uhub1: at uhub0, port 8, addr 2 (disconnected) ugen0.4: <vendor 0x05ac> at usbus0 (disconnected) ukbd0: at uhub1, port 1, addr 3 (disconnected) ugen0.5: <vendor 0x05ac> at usbus0 (disconnected) ums1: at uhub1, port 2, addr 4 (disconnected) ugen0.6: <Apple Inc.> at usbus0 (disconnected) ugen0.7: <Apple Inc.> at usbus0 (disconnected) ukbd1: at uhub0, port 12, addr 6 (disconnected) uhid0: at uhub0, port 12, addr 6 (disconnected) ums2: at uhub0, port 12, addr 6 (disconnected) ugen0.8: <Apple> at usbus0 (disconnected) umass0: at uhub0, port 19, addr 7 (disconnected) da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <APPLE SD Card Reader 3.00> s/n 000000000820 detached (da0:umass-sim0:0:0:0): Periph destroyed I still revert xhci_interrupt back to 9.1R, unplug/plug this WLAN, xhci driver works perfect. Cheers, Huang Wen Hui 2014/1/7 Hans Petter Selasky <h...@bitfrost.no> > On 01/07/14 08:07, Huang Wen Hui wrote: > >> Hi, >> This patch fixed my problem! >> >> Thanks, >> Huang Wen Hui. >> > > http://svnweb.freebsd.org/changeset/base/260388 > > --HPS > _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
