Ted Sikora wrote: > Your right the addresses seem to be standard machine resources. Are you > using SMP? The irq's are remapped on a SMP machine so maybe that's were > the trouble lies? The PNP tag is what has me stumped. I replaced the isa > cards with pci this evening out of curiosity...same thing. Nope, I'm using a UP kernel. Like you mention, I've also taken out my only PCI card (fxp) and disabled the sound interface via the BIOS and I get the same thing. I've toggled the `PnP OS' flag in my BIOS as well which doesn't do anything. From what you've said and what I've experienced; I'm even more convinced the problem's nothing to do with ISA/PCI devices. I'm going to have a look at the code a bit more later on tonight... Another interesting point is the dmesg I get now after I set "int bootverbose" to '1' in `/usr/src/sys/i386/i386/machdep.c'. I'd really love to hear from a coding-type figure that could determine the severity of a lot of the error messages reported. Ted, would it be possible to see a copy of your kernel? Also, what motherboard do you have? Are there any other coding-type figures actually following this thread? > Ted Sikora > Jtl Development Group > [EMAIL PROTECTED] Regards, Trent. (dmesg w/ bootverbose=1 attached, please take a look!)
Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #2: Wed May 3 21:26:09 WST 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/breaker_03May2000 Calibrating clock(s) ... TSC clock: 232779341 Hz, i8254 clock: 1193149 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (232.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX> real memory = 66977792 (65408K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00372000 - 0x03fd7fff, 63332352 bytes (15462 pages) avail memory = 60895232 (59468K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fdb60 bios32: Entry = 0xfdb70 (c00fdb70) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb91 pnpbios: Found PnP BIOS data at 0xc00f5ff0 pnpbios: Entry = f0000:5904 Rev = 1.0 Other BIOS signatures found: ACPI: 000fa050 Preloaded elf kernel "kernel" at 0xc0359000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=10 map[20]: type 1, range 32, base 0000ef80, size 5, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00000440, size 4, enabled found-> vendor=0x1274, dev=0x1371, revid=0x06 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 0000ef00, size 6, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base febff000, size 12, enabled map[14]: type 1, range 32, base 0000ee80, size 6, enabled map[18]: type 1, range 32, base fea00000, size 20, enabled pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x10de, dev=0x0020, revid=0x04 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base f3000000, size 24, enabled pci1: <PCI bus> on pcib1 pci1: <NVidia Riva TNT graphics accelerator> (vendor=0x10de, dev=0x0020) at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 status0=50 status1=50 ata0: mask=03 status0=50 status1=50 ata0: devices = 0x3 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=03 status0=50 status1=50 ata1: mask=03 status0=00 status1=00 ata1: devices = 0xc ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 440 intpm0: intr IRQ 9 enabled revision -1072283136 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped 400 pcm0: <AudioPCI ES1371> port 0xef00-0xef3f irq 9 at device 12.0 on pci0 pcm0: ac97 codec id 0x43525903 pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 6 bit master volume, using shared irq9. pcm: setmap 3dd0000, 1000; 0xc1f86000 -> 3dd0000 pcm: setmap 3dd5000, 1000; 0xc1f8b000 -> 3dd5000 fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xee80-0xeebf mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 9 at device 14.0 on pci0 fxp0: Ethernet address 00:04:ac:53:46:dd fxp0: supplying EUI64: 00:04:ac:ff:fe:53:46:dd bpf: fxp0 attached pnpbios: 17 devices, largest 194 bytes PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x3fe0000-0x3ff7fff, size=0x18000 PNP0c01: adding fixed memory32 range 0x3ff8000-0x3ffffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 PNP0c01: end config pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0c01: adding fixed memory32 range 0x100000-0x3fdffff, size=0x3ee0000 PNP0c01: end config pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 00x4 PNP0000: end config pnpbios: handle 2 device ID PNP0000 (0000d041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1 PNP0200: end config pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0100: adding irq mask 00x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: end config pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: end config pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 00x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: end config pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: end config pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0x1 PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1 PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1 PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1 PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1 PNP0c02: adding io range 0x400-0x43f, size=0x40, align=0x1 PNP0c02: adding io range 0x440-0x44f, size=0x10, align=0x1 PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: end config pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x1 PNP0c02: adding io range 0x370-0x371, size=0x2, align=0x1 PNP0c02: end config pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 PNP0501: end config pnpbios: handle 11 device ID PNP0501 (0105d041) PNP0c02: end config pnpbios: handle 12 device ID PNP0c02 (020cd041) PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8 PNP0400: adding io range 0-0xffffffff, size=0, align=0x8 PNP0400: adding irq mask 0x80 PNP0400: adding dma mask 00 PNP0400: end config pnpbios: handle 13 device ID PNP0400 (0004d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: end config pnpbios: handle 14 device ID PNP0700 (0007d041) PNP0f13: adding irq mask 0x1000 PNP0f13: end config pnpbios: handle 15 device ID PNP0f13 (130fd041) PNP0a03: end config pnpbios: handle 16 device ID PNP0a03 (030ad041) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x1 on isa0 sio0: type 16550A ppc0: parallel port found at 0x378 ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode nTppb1284: error=3 status=0xd8 event=24 1Tppbus0: IEEE1284 device found n1/NIBBLETn2ppb1284: error=1 status=0xe8 event=7 TnTppb1284: error=3 status=0xd8 event=24 8ppb1284: error=1 status=0xe8 event=7 TnTppb1284: error=3 status=0xd8 event=24 8ppb1284: error=1 status=0xe8 event=7 TnTppb1284: error=3 status=0xd8 event=24 4ppb1284: error=1 status=0xe8 event=7 TnTppb1284: error=3 status=0xd8 event=24 1/NIBBLE_IDTn2ppb1284: error=1 status=0xe8 event=7 TnTppb1284: error=3 status=0xd8 event=24 8ppb1284: error=1 status=0xe8 event=7 TnTppb1284: error=3 status=0xd8 event=24 8ppb1284: error=1 status=0xe8 event=7 TnTppb1284: error=3 status=0xd8 event=24 0T/Extensibility LinkTppb1284: error=3 status=0xd8 event=24 Probing for PnP devices on ppbus0: nTppb1284: error=3 status=0xd8 event=24 1BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBTppb: <PnP> 102 characters: (0x0) f(0x66) M(0x4d) F(0x46) G(0x47) :(0x3a) C(0x43) a(0x61) n(0x6e) o(0x6f) n(0x6e) ;(0x3b) C(0x43) M(0x4d) D(0x44) :(0x3a) B(0x42) J(0x4a) ,(0x2c) L(0x4c) Q(0x51) ,(0x2c) B(0x42) J(0x4a) L(0x4c) ,(0x2c) B(0x42) J(0x4a) R(0x52) a(0x61) s(0x73) t(0x74) e(0x65) r(0x72) ,(0x2c) B(0x42) S(0x53) C(0x43) C(0x43) ;(0x3b) M(0x4d) D(0x44) L(0x4c) :(0x3a) B(0x42) J(0x4a) C(0x43) -(0x2d) 2(0x32) 6(0x36) 5(0x35) S(0x53) P(0x50) ;(0x3b) C(0x43) L(0x4c) S(0x53) :(0x3a) P(0x50) R(0x52) I(0x49) N(0x4e) T(0x54) E(0x45) R(0x52) ;(0x3b) D(0x44) E(0x45) S(0x53) :(0x3a) C(0x43) a(0x61) n(0x6e) o(0x6f) n(0x6e) (0x20) B(0x42) J(0x4a) C(0x43) -(0x2d) 2(0x32) 6(0x36) 5(0x35) S(0x53) P(0x50) ;(0x3b) V(0x56) E(0x45) R(0x52) :(0x3a) 1(0x31) .(0x2e) 0(0x30) 0(0x30) ;(0x3b) S(0x53) T(0x54) A(0x41) :(0x3a) 1(0x31) 0(0x30) ;(0x3b) ppbus0: <Canon BJC-265SP/1.00> PRINTER BJ,LQ,BJL,BJRaster,BSCC lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices unknown0: <PNP0c01> at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x3fe0000-0x3ff7fff,0x3ff8000-0x3ffffff,0xfec00000-0xfec00fff,0xfee00000-0xfee00fff,0xfff80000-0xffffffff on isa0 unknown1: <PNP0c01> at iomem 0x100000-0x3fdffff on isa0 unknown: <PNP0000> can't assign resources unknown2: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on isa0 unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0 unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0 unknown: <PNP0303> can't assign resources unknown5: <PNP0800> at port 0x61 on isa0 unknown6: <PNP0c04> at port 0xf0-0xff irq 13 on isa0 unknown: <PNP0c02> can't assign resources unknown7: <PNP0c02> at port 0x290-0x297,0x370-0x371 on isa0 unknown: <PNP0501> can't assign resources unknown8: <PNP0c02> on isa0 unknown: <PNP0400> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0f13> can't assign resources unknown9: <PNP0a03> on isa0 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:030c7f3f 0..780=781 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: ppp0 attached new masks: bio 4008c440, tty 40031292, net 40071292 bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: <QUANTUM FIREBALL CR8.4A/A5U.1200> ATA-4 disk at ata0 as master ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata0-slave: success setting up UDMA2 mode on PIIX4 chip ad1: <QUANTUM FIREBALL ST3.2A/A0F.0800> ATA-3 disk at ata0 as slave ad1: 3079MB (6306048 sectors), 6256 cyls, 16 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 1 depth queue, UDMA33 ad1: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad1 Creating DISK wd1 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up WDMA2 mode on PIIX4 chip acd0: <Hewlett-Packard CD-Writer Plus 8200/1.0f> CD-RW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, WDMA2 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ata1-slave: piomode=3 dmamode=1 udmamode=-1 dmaflag=1 ata1-slave: success setting up PIO3 mode on generic chip acd1: <CD-524E/3.0C> CDROM drive at ata1 as slave acd1: read 4134KB/s (4134KB/s), 128KB buffer, PIO3 acd1: Reads: CD-DA stream acd1: Audio: play, 16 volume levels acd1: Mechanism: ejectable tray acd1: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 12578894, size 12578832 : OK ad0s2: type 0xe, start 12578895, end = 16498754, size 3919860 : OK start_init: trying /sbin/init WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices Linux-ELF exec handler installed splash: image decoder found: logo_saver ad1s1: type 0x7, start 63, end = 6306047, size 6305985 : OK