On Wed, Feb 03, 2016 at 08:57:01PM +0100, s....@web.de wrote: > After updating -current at Jan, 31st (r295091) the Realtek ethernet device > driver of my Zotac ZBox RI323 mini pc seems to be broken: I can neither > connect to the host even though the interface is shown as active, nor can I > initiate connection from the host through re0. > Reverting the kernel to my previous build -current r290151 (install date Nov > 1st, 2015) the re0 interface is working OK. > > Looking through the svn logs regarding /head/sys/dev/re/if_re.c I supect, > that Revision 290566 might have someting to do with this and that I have to > include my Realtek Chipset to the exclusion list for "enabling RX/TX after > initial configuration (or viceversa; I am really confused here), but I havent > got a clue how; as I do not know how to find the right RL_HWREV_XXX flag for > my device. > > dmesg shows RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet and > pciconf -l -v re0 shows: > re0@pci0:2:0:0: class=0x020000 card=0x816819da chip=0x816810ec rev=0x07 > hdr=0x00 > vendor = 'Realtek Semiconductor Co., Ltd.' > device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller' > > I am grateful for any suggestion towards a solution and I am willing (and > able) to assist by patching or debugging my kernel or giving further hw > information about my system. >
Hrm, does that happen to be RL_HWREV_8411B (0x5c800000) according to the "Chip rev." in the dmesg(8) output? Marius _______________________________________________ email@example.com mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"