On Mon, 3 Oct 2016 12:35:08 +0300 Daniel Braniss <da...@cs.huji.ac.il> wrote:
> > > On 3 Oct 2016, at 12:30 PM, O. Hartmann <ohart...@zedat.fu-berlin.de> wrote: > > > > Am Sun, 2 Oct 2016 15:30:41 -0400 > > Allan Jude <allanj...@freebsd.org <mailto:allanj...@freebsd.org>> schrieb: > > > >> On 2016-10-02 15:25, O. Hartmann wrote: > >>> > >>> Running 12-CURRENT (FreeBSD 12.0-CURRENT #32 r306579: Sun Oct 2 09:34:50 > >>> CEST 2016 > >>> ), I have a NanoBSD setup which creates an image for a router device. > >>> > >>> The problem I face is related to ZFS. The system has a system's SSD > >>> (Samsung 850 Pro, > >>> 256GB) which has an UFS filesystem. Aditionally, I have also a backup and > >>> a data HDD, > >>> both WD, one 3 TB WD RED Pro, on 4 TB WD RED (the backup device). Both > >>> the sources for > >>> the NanoBSD and the object tree as well as the NANO_WORLDDIR are residing > >>> on the 3 TB > >>> data drive. > >>> > >>> The box itself has 8 GB RAM. When it comes to create the memory disk, > >>> which is ~ 1,3 > >>> GB in size, the NanoBSD script starts creating the memory disk and then > >>> installing > >>> world into this memory disk. And this part is a kind of abyssal in terms > >>> of the speed. > >>> > >>> The drive sounds like hell, the heads are moving rapidly. The copy speed > >>> is incredibly > >>> slow compared to another box I usually use in the lab with UFS filesystem > >>> only > >>> (different type of HDD). > >>> > >>> The whole stuff the nanbsd is installed from and to is on a separate ZFS > >>> partition, > >>> but in the same pool as everything else. When I first setup the new > >>> partitions, I > >>> switched on deduplication, but I quickly deactivated it, because it had a > >>> tremendous > >>> impact on the working speed and memory consumption on that box. But > >>> something seems > >>> not right since then - as I initially described, the copy/initialisation > >>> speed/bandwith is abyssal. Well, I also fear that I did something wrong > >>> when I firt > >>> initialised the HDD - there is this 125bytes/4k block discussion and I do > >>> not know > >>> how to check whether I'm affected to that or not (or even causing the > >>> problems) and > >>> how to check whether DEDUPLICATION is definitely OFF (apart from the > >>> usual stuff list > >>> features via "zfs get all"). > >>> > >>> As an example: the nanbosd script takes ~ 1 minute to copy /boot/loader > >>> from source to > >>> memory disk and the HDD makes sounds like hell and close to loosing the > >>> r/w heads. On > >>> other boxes this task is done in a blink of an eye ... > >>> > >>> Thanks for your patience, > >>> > >>> Regards, > >>> oh > >>> > >> > >> Turning deduplication off, only stops new blocks from being > >> deduplicated. Any data written while deduplication was on, are still > >> deduplicated. You would need to zfs send | zfs recv, or > >> backup/destroy/restore to get the data back to normal. > >> > >> If the drive is making that much noise, have you considered that the > >> drive might be failing? > >> > > > > Hello. > > > > Might there be any hint I can investigate on that ZFS partition showing me > > that the > > particular partition is still doing deduplication? If I wouldn't know that > > I switch > > dedup on and later off, I would blame the OS instead. So, for further > > forensik analysis > > in the future, it would be nice to know how to look at it - if it is doable > > via simple > > checking the features of the ZFS partition ... > > > > Thanks, > > oh > > not really an answer, but zpool has a nice command: history, it sometimes > helps to find what and when > nfs commands where given. > > danny Looks helpful to confirm 'when and how changed', but the output contains 'all' changes such as snapshots. Would be hard to determine what is the current configuration. To determine what is the current settings, `zfs get all zroot` for case that pool name is zroot. Pool name can include child dataset like zroot/local. To list all children, use `zfs get -r all zroot` instead. To focus on dedup `zfs get -p dedup zroot` can be better. If you want children datasets, '-r' shall be specified before '-p'. Unfortunately, this (sub)command cannot show change logs. HTH. -- Tomoaki AOKI <junch...@dec.sakura.ne.jp> _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
