On Sun, Dec 11, 2016 at 11:47:09PM +0300, Slawa Olhovchenkov wrote: > Booting... > ESC[01;00H8+0x8+0xe9bdc] > KDB: debugger backends: ddb > KDB: current backend: ddb > exit from kdb_init > KDB: enter: Boot flags requested debugger > [ thread pid 0 tid 0 ] - remove any video consoles from the HEAD kernel config, i.e. sc/vt and vga/efi, - do not use boot -d, - use serial console (IPMI SOL qualifies), - set late console to 0, and show me the verbose dmesg of such boot with the BIOS options which cause troubles.
> > > Hm, might be also show the output of the 'smap' and 'memmap' output from > > the loader. If any of them worked, could be useful to see the same output > > with the NUMA option disabled as well. > > NUMA disabled: > OK smap > SMAP type=01 base=0000000000000000 len=0000000000099c00 attr=01 > SMAP type=02 base=0000000000099c00 len=0000000000006400 attr=01 > SMAP type=02 base=00000000000e0000 len=0000000000020000 attr=01 > SMAP type=01 base=0000000000100000 len=000000007906b000 attr=01 > SMAP type=02 base=000000007916b000 len=000000000093a000 attr=01 > SMAP type=04 base=0000000079aa5000 len=0000000000505000 attr=01 > SMAP type=02 base=0000000079faa000 len=0000000002056000 attr=01 > SMAP type=01 base=0000000100000000 len=0000001f80000000 attr=01 > SMAP type=02 base=000000007c000000 len=0000000014000000 attr=01 > SMAP type=02 base=00000000fed1c000 len=0000000000029000 attr=01 > SMAP type=02 base=00000000ff000000 len=0000000001000000 attr=01 > NUMA enabled: > OK smap > SMAP type=01 base=0000000000000000 len=0000000000099c00 attr=01 > SMAP type=02 base=0000000000099c00 len=0000000000006400 attr=01 > SMAP type=02 base=00000000000e0000 len=0000000000020000 attr=01 > SMAP type=01 base=0000000000100000 len=000000007906b000 attr=01 > SMAP type=04 base=0000000079aa1000 len=0000000000509000 attr=01 > SMAP type=02 base=0000000079faa000 len=0000000002056000 attr=01 > SMAP type=01 base=0000000100000000 len=0000001f80000000 attr=01 > SMAP type=02 base=000000007c000000 len=0000000014000000 attr=01 > SMAP type=02 base=00000000fed1c000 len=0000000000029000 attr=01 > SMAP type=02 base=00000000ff000000 len=0000000001000000 attr=01 > OK memmap > memmap not found I.e. you use CMS in BIOS/legacy BIOS boot, right ? Can you double-check that the smap output is indeed same for all three cases (no-NUMA, NUMA without <4G interleave, NUMA with 4G interleave) ? msgbuf setup is very early activity and for most practical purposes it only depends on the physical segments layout of the machine. So I do expect that smap layout changes when the options are frobbed. _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
