Just a "me too", with a different panic after this commit:
Assertion (key.to) > 0 && (key.to) <= w_max_used_index && (key.to) <
witness_count failed at sys/kern/subr_witness.c:2961
db_trace_self_wrapper()
vpanic()
kassert_panic()
witness_checkorder()
__mtx_lock_flags()
vmem_xalloc()
vmem_alloc()
kmem_malloc()
malloc()
device_set_driver()
device_probe_child()
device_probe()
bus_generic_attach()
pci_attach()
device_attach()
bus_generic_attach()
acpi_pcib_acpi_attach()
device_attach()
bus_generic_attach()
nexus_acpi_attach()
device_attach()
bus_generic_new_pass()
bus_set_pass()
configure()
mi_startup()
btext()
igb0@pci0:2:0:0: class=0x020000 card=0x10c915d9 chip=0x10c98086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82576 Gigabit Network Connection'
class = network
subclass = ethernet
igb1@pci0:2:0:1: class=0x020000 card=0x10c915d9 chip=0x10c98086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82576 Gigabit Network Connection'
class = network
subclass = ethernet
Reverting r323516 helps, attaching dmesg.boot after revert.
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #2 r323632+c886c4b69844(master): Sat Sep 16 03:59:42 MSK
2017
yuri@sirius.local:/usr/obj/data/src/freebsd-src/sys/GENERIC amd64
FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM
5.0.0svn)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: AMD Opteron(tm) Processor 6262 HE (1600.03-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66716770304 (63626 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <111011 APIC1157>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 2 cache groups x 8 core(s)
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
random: unblocking device.
arc4random: no preloaded entropy cache
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32
(20170831/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
amd_thresholding_init: 0xc01c0ffe01000000: count already enabled
SMP: AP CPU #1 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #31 Launched!
SMP: AP CPU #25 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #29 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #23 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #24 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #30 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #22 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #27 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #28 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #26 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1600032353 Hz quality 800
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff80f71840, 0) error 19
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
cpu24: <ACPI CPU> on acpi0
cpu25: <ACPI CPU> on acpi0
cpu26: <ACPI CPU> on acpi0
cpu27: <ACPI CPU> on acpi0
cpu28: <ACPI CPU> on acpi0
cpu29: <ACPI CPU> on acpi0
cpu30: <ACPI CPU> on acpi0
cpu31: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 13.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd800-0xd81f mem
0xdffe0000-0xdfffffff,0xdffc0000-0xdffdffff,0xdff9c000-0xdff9ffff irq 17 at
device 0.0 on pci1
igb0: attach_pre capping queues at 8
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 8
igb0: pxm cpus: 32 queue msgs: 9 admincnt: 1
igb0: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
igb0: using 8 rx queues 8 tx queues
igb0: Using MSIX interrupts with 9 vectors
igb0: allocated for 8 tx_queues
igb0: allocated for 8 rx_queues
igb0: Ethernet address: 00:25:90:72:54:22
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd400-0xd41f mem
0xdff60000-0xdff7ffff,0xdff40000-0xdff5ffff,0xdff1c000-0xdff1ffff irq 18 at
device 0.1 on pci1
igb1: attach_pre capping queues at 8
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 8
igb1: pxm cpus: 32 queue msgs: 9 admincnt: 1
igb1: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
igb1: using 8 rx queues 8 tx queues
igb1: Using MSIX interrupts with 9 vectors
igb1: allocated for 8 tx_queues
igb1: allocated for 8 rx_queues
igb1: Ethernet address: 00:25:90:72:54:23
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port
0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem
0xdfef8400-0xdfef87ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfef7000-0xdfef7fff irq 16
at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfef6000-0xdfef6fff irq 16
at device 18.1 on pci0
usbus1 on ohci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfef8800-0xdfef88ff irq
17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfefa000-0xdfefafff irq 18
at device 19.0 on pci0
usbus3 on ohci2
usbus3: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfef9000-0xdfef9fff irq 18
at device 19.1 on pci0
usbus4 on ohci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfef8c00-0xdfef8cff irq
19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem
0xdd000000-0xddffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 20 at
device 4.0 on pci2
vgapci0: Boot video device
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfefb000-0xdfefbfff irq 18
at device 20.5 on pci0
usbus6 on ohci4
usbus6: 12Mbps Full Speed USB v1.0
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pci3: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 4.0 on pci3
pci4: <ACPI PCI bus> on pcib4
isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0xe800-0xe8ff mem
0xdcfbc000-0xdcfbffff irq 17 at device 0.0 on pci4
isp0: Polled Mailbox Command (0x8) Timeout (100000us) (isp_reset:952)
isp0: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT)
isp0: isp_reinit: cannot reset card
device_attach: isp0 attach returned 6
acpi_button0: <Power Button> on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen6.1: <ATI OHCI root HUB> at usbus6
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen5.1: <ATI EHCI root HUB> at usbus5
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen0.1: <ATI OHCI root HUB> at usbus0
ugen3.1: <ATI OHCI root HUB> at usbus3
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSC2CW060A3 400i> ACS-2 ATA SATA 2.x device
ada0: Serial Number EKCV32250139060AGN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 57241MB (117231408 512 byte sectors)
uhub2: ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA8-ACS SATA 3.x device
ada1: Serial Number WD-WCATR1089097
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA8-ACS SATA 3.x device
ada2: Serial Number WD-WCATR1297462
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA8-ACS SATA 3.x device
ada3: Serial Number WD-WCATR1505902
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors)
ada3: quirks=0x1<4K>
ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
ada4: <WDC WD10EZEX-21WN4A0 01.01A01> ACS-3 ATA SATA 3.x device
ada4: Serial Number WCC6Y0SPLHE7
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 953869MB (1953525168 512 byte sectors)
3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus6 usbus5 usbus2
ugen6.2: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus6
ukbd0 on uhub6
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev
1.10/0.01, addr 2> on usbus6
kbd2 at ukbd0
Root mount waiting for: usbus5 usbus2
uhub4: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Link state changed to up
igb0: link state changed to UP
Link state changed to up
igb1: link state changed to UP
ums0 on uhub6
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev
1.10/0.01, addr 2> on usbus6
ums0: 3 buttons and [Z] coordinates ID=0
_______________________________________________
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
