On 03/08, Hans Petter Selasky wrote:
On 03/08/18 17:16, Bernd Walter wrote:
Hardware is a Raspberry Pi3 with current r330034.
I'm trying to run a USB touchscreen.
Tested wmt and uep, but neither wants to attach, although the Waveshare
display I'm using is likely running an egalaxy firmware.
However webcamd accepts the device and creates a /dev/input/event0.
But I can't get X to use it.
xf86-input-evdev-2.10.5 is installed and it created an X config file
under /usr/local/share/X11/xorg.conf.d/10-evdev.conf.
I also tried some google results in /etc/X11/xorg.conf, but X never
touches the device:
See here:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=196678
Or here:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=222609
But that's all about hotplug. It is definitely possible to manually
configure the device on the stock xorg-server package. I can't say if
the "google results" are correct without actually seeing them, but it
should explicitly specify the /dev/input/event0 path.
_______________________________________________
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
