>On my VAIO laptop, I have trouble rebooting directly from Windows to
>FreeBSD (luckily enough I don't run Windows that often :-)
>I tried to look at the driver code, but it looks to me like it is doing
>resets when attaching the fxp driver, but somehow, Windows has left it
>in the state where it isn't recognized properly.
>Below I have dmesg output, stripped to the fxp0 part. Does anyone have
>an idea what the problem might be, or where to try to debug this?
>I have added some comments to the dmesg output, /* here */, to add the
>programs running there
>FreeBSD 5.0-CURRENT #0: Wed Dec  6 09:34:39 CET 2000
>    [EMAIL PROTECTED]:/usr/src2/sys/compile/vaio
>Preloaded elf kernel "kernel" at 0xc042b000.
>Preloaded userconfig_script "/boot/kernel.conf" at 0xc042b09c.
>Preloaded elf module "if_fxp.ko" at 0xc042b0ec.
>fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 
>0xfed00000-0xfedfffff,0xfecff000-0xfecfffff irq 9 at device 11.0 on pci0
>fxp0: Ethernet address ff:ff:ff:ff:ff:ff, 10Mbps
>BRIDGE 990810, have 7 interfaces
>-- index 1  type 6 phy 0 addrl 6 addr ff.ff.ff.ff.ff.ff
>/* dhclient leads to the below */
>fxp0: SCB timeout

   Based on the above, I would say that Windows has powered-down the NIC. This
is outside of the scope of the driver, so I don't think a solution should be
implemented there. Probably something for our APM folks.


David Greenman
Co-founder, The FreeBSD Project - http://www.freebsd.org
President, TeraSolutions, Inc. - http://www.terasolutions.com
Pave the road of life with opportunities.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to