> I have a KT7 with an athlon 1.1, no problems with ATA66, don't have a 100
> drive though.  Works fine, does make worlds in a little over an hour with
> 384mb of pc133, but I do have to downclock the pc133 to 100 because these
> via chips have some problem with agp and pc133 at the moment.

Another datapoint - I have an MSI 694D motherboard, with Via Apollo Pro
133A chipset, 2 x PIII-800EB, 4 x IBM 75GXP disks (two on ATA-66, two on
ATA-100). Works like a charm, extremely stable, runs continuous buildworld
and untar/rm ports with no problem. PC-133 memory, running at 133 Mhz. No
overclocking, adequate cooling.

The heir apparent to the Abit BP6 :-)

Steinar Haug, Nethelp consulting, [EMAIL PROTECTED]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #2: Mon Dec 25 12:01:26 CET 2000
    [EMAIL PROTECTED]:/usr/local/freebsd/stable4/src/sys/compile/MGMTSRV
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (801.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
real memory  = 536805376 (524224K bytes)
avail memory = 519806976 (507624K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02e3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 16
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x9000-0x900f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 19
pci0: <VIA 83C572 USB controller> at 7.3 irq 19
chip2: <VIA 82C686 AC97 Audio> port 0xa400-0xa403,0xa000-0xa003,0x9c00-0x9cff irq 18 
at device 7.5 on pci0
atapci1: <Promise ATA100 controller> port 
0xbc00-0xbc3f,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac07 mem 
0xd9000000-0xd901ffff irq 18 at device 12.0 on pci0
ata2: at 0xac00 on atapci1
ata3: at 0xb400 on atapci1
chip3: <Texas Instruments TSB12LV26 PCI to 1394 host controller> mem 
0xd9020000-0xd9023fff,0xd9024000-0xd90247ff irq 19 at device 13.0 on pci0
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xc000-0xc07f mem 0xd9025000-0xd902507f irq 
17 at device 15.0 on pci0
xl0: Ethernet address: 00:01:02:b6:0c:da
xl0: selecting 10baseT transceiver, half duplex
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-master UDMA66
ad2: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-master UDMA66
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100
ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100
Mounting root from ufs:/dev/ad0s1a

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to