I had a functional install of -current which was created back on Jan 11th of
this year. 

I cvsup'd yesterday (4/12. I had also tried this on 4/4) fixxed what I
needed too from UPDATING and RELNOTES, built and installed world and a new

fxp now fails.

Searching back I saw that fxp now requires miibus and that is in there but I
don't see anything else that has changed. Is there something else I need to
tweak to get this to work again?

Kernel config and dmesg output below...

MOXIE config

machine         i386
cpu             I586_CPU
ident           MOXIE
maxusers        32

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug symbols

options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
options         SOFTUPDATES             #Enable FFS soft updates support
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev

options         DIAGNOSTIC

# firewall
options         IPFIREWALL
options         IPFIREWALL_VERBOSE
options         IPFIREWALL_VERBOSE_LIMIT=100

device          random

device          isa
device          eisa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
options         ATA_STATIC_ID

# SCSI Controllers

device          adv

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc
device          atkbd
device          psm

device          vga

# splash screen/screen saver
device  splash

# syscons is the default console driver, resembling an SCO console
device          sc

# Floating point support - do not disable.
device          npx

# Serial (COM) ports
device          sio

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer

# PCI Ethernet NICs.
device          miibus
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)

device          ep

# Pseudo devices - the number indicates how many units to allocated.
device          loop            # Network loopback
device          ether           # Ethernet support
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf             #Berkeley packet filter

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Apr 13 09:33:04 EDT 2001
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MOXIE
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 166194014 Hz
CPU: Pentium/P55C (166.19-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x544  Stepping = 4
real memory  = 67108864 (65536K bytes)
avail memory = 61964288 (60512K bytes)
Preloaded elf kernel "kernel" at 0xc034b000.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xfff0-0xffff at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 1.2 (no driver attached)
pci0: <display, VGA> at 8.0 (no driver attached)
adv0: <AdvanSys ASC3030/50 SCSI controller> port 0x5000-0x50ff mem 
0x60101000-0x601010ff irq 11 at device 10.0 on pci0
adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 240
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x541f mem 
0x60000000-0x600fffff,0x60100000-0x60100fff irq 15 at device 11.0 on pci0
fxp0: could not map interrupt
device_probe_and_attach: fxp0 attach returned 6
isa0: unexpected small tag 14
isa0: unexpected small tag 14
ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address 00:20:af:26:17:c3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, 
default to deny, logging limited to 100 packets/entry by default
ad0: 2441MB <WDC AC32500H> [4960/16/63] at ata0-master WDMA2
acd0: CDROM <HITACHI CDR-8130> at ata0-slave PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
(da0:adv0:0:4:0): Timed out
(da0:adv0:0:4:0): Attempting abort
(da0:adv0:0:4:0): Timed out
(da0:adv0:0:4:0): Resetting bus
adv0: No longer in timeout
da0 at adv0 bus 0 target 4 lun 0
da0: <iomega jaz 1GB J.83> Removable Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 1021MB (2091050 512 byte sectors: 64H 32S/T 1021C)

Darren Henderson                                  [EMAIL PROTECTED]
                                            [EMAIL PROTECTED]

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to