Hello all,

after the recent linker_set-changes on my system the ps2-mouse
is not working any more. It seems that a second (virtual ;-)
keyboard is detected (atkbd1) and that this messes up things.

I can reproduce this with a GENERIC-kernel (output of dmesg is
appended). The system is a dual-prox ABIT VP6 with VIA-Chipset.

Any ideas?


Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Jun 15 09:46:42 MEST 2001
    [EMAIL PROTECTED]:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 998363727 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (998.36-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
real memory  = 671023104 (655296K bytes)
avail memory = 646905856 (631744K bytes)
Preloaded elf kernel "kernel" at 0xc056f000.
Pentium Pro MTRR support enabled
WARNING: Driver mistake: destroy_dev on 154/0
Using $PIR table, 8 entries at 0xc00fdbc0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Hewlett-Packard DeskJet 990C, rev 1.10/1.00, addr 2, iclass 7/1
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at 7.4 (no driver attached)
pci0: <multimedia, audio> at 9.0 (no driver attached)
pci0: <input device> at 9.1 (no driver attached)
sym0: <810> port 0xd400-0xd4ff mem 0xda003000-0xda0030ff irq 5 at device 10.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
pci0: <multimedia, video> at 12.0 (no driver attached)
pci0: <multimedia> at 12.1 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xda002000-0xda00207f 
irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:10:5a:d7:dd:9c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT370 ATA100 controller> port 
0xec00-0xecff,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc07 irq 11 at device 
14.0 on pci0
ata2: at 0xdc00 on atapci1
ata3: at 0xe400 on atapci1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
atkbd1: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd1 at atkbd1
psm1: unable to allocate the IRQ resource (12).
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc1: cannot reserve I/O port range
ppc1: parallel port not found.
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
ad0: 32634MB <IBM-DPTA-373420> [66305/16/63] at ata0-master tagged UDMA66
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master tagged UDMA100
ad6: 32634MB <IBM-DPTA-373420> [66305/16/63] at ata3-master tagged UDMA66
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s4a
cd0 at sym0 bus 0 target 3 lun 0
cd0: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [335988 x 2048 byte records]
linprocfs registered
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, 
default to deny, logging disabled
lock order reversal
 1st 0xc04dfee0 mntvnode @ ../../ufs/ffs/ffs_vfsops.c:1007
 2nd 0xd667e10c vnode interlock @ ../../ufs/ffs/ffs_vfsops.c:1016
link_elf: symbol linux_ioctl_register_handler undefined
link_elf: symbol linux_ioctl_register_handler undefined
xl0: promiscuous mode enabled
vmnet1: promiscuous mode enabled

        michael class, viktor-renner str. 39, 72074 tuebingen, frg
                    E-Mail: [EMAIL PROTECTED]
         Phone: +49 7031 14-3707 (work) +49 7071 81950 (private)

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to