Hi everyone !
I installed -CURRENT some time ago... i would like to help and do some
testing on my spare time.
for now i build (once a week on average) and use as much as i can.

many ports don't work (but i think it's normal, problems with pthread
-> seg fault), so i compile them on my -STABLE system.

i attach my dmesg / KERNEL (NEPTUNE). some things aren't properly
detected by my kernel. if you could give some advice about the PNP
lines... it would be cool. and i can't understand why on _every_
machine i build, UDMA doesn't seem to work ! (i've got a good cable in
neptune). there is also a "driver mistake" somewhere near sc1.

anyway thanks all for your wonderfull work. i've never seen a
"current"  OS run so flawlessly !

some words about my config:

the -STABLE (in fact -RC, i didn't update) machine exports /usr/home
(vinum stripe) for the -CURRENT.

the -CURRENT is : ASUS CUV4X-D + 2xPIII 800Mhz + 784Mo + 2x30Go IBM +
TNT2 + tekram DC310 +... all is in dmesg, dumb am i !

keep up the good work !

Olivier Cortes
free software admin

all the stuff:

i last cvsup'd and built kernel/world 3 hours ago. (06-19-2001)

root@neptune[294] #uname -a
FreeBSD neptune.deep-ocean.local 5.0-CURRENT FreeBSD 5.0-CURRENT #0:
Thu Jul 19 20:40:05 CEST 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/NEPTUNE  i386

--------------------------------------------------------------- dmesg

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
        The Regents of the University of California. All rights
FreeBSD 5.0-CURRENT #0: Thu Jul 19 20:40:05 CEST 2001
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NEPTUNE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (803.61-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
real memory  = 805289984 (786416K bytes)
avail memory = 778756096 (760504K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  3, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc043f000.
Preloaded elf module "splash_bmp.ko" at 0xc043f09c.
Pentium Pro MTRR support enabled
module_register_init: MOD_LOAD (splash_bmp, c043a8ac, 0) error 2
Using $PIR table, 7 entries at 0xc00f1270
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 18 -> irq 7
IOAPIC #0 intpin 17 -> irq 9
IOAPIC #0 intpin 16 -> irq 10
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device
4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb81f mem
ffff,0xf5000000-0xf5000fff irq 2 at device 9.0 on pci0
fxp0: Ethernet address 00:a0:c9:ea:ab:fe
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <810a> port 0xb400-0xb4ff mem 0xf1000000-0xf10000ff irq 7 at
device 10.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
pci0: <multimedia, video> at 11.0 (no driver attached)
pci0: <multimedia> at 11.1 (no driver attached)
ahc0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xb000-0xb0ff
mem 0xf0800
000-0xf0800fff irq 10 at device 12.0 on pci0
ahc0: Host Adapter Bios disabled.  Using default SCSI device
aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs
pcm0: <Creative EMU10K1> port 0xa800-0xa81f irq 2 at device 13.0 on
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
sc1: <System console> on isa0
sc1: MDA <16 virtual consoles, flags=0x0>
WARNING: Driver mistake: repeat make_dev("consolectl")
vga1: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0303> can't assign resources
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
ad1: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-slave UDMA100
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
Mounting root from ufs:/dev/ad1s1a
cd0 at sym0 bus 0 target 3 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.05> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not
cd1 at sym0 bus 0 target 5 lun 0
cd1: <TEAC CD-R56S 1.0H> Removable CD-ROM SCSI-2 device 
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not
da0 at sym0 bus 0 target 4 lun 0
da0: <iomega jaz 1GB J^77> Removable Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: Attempt to query device size failed: NOT READY, Medium not
SMP: AP CPU #1 Launched!
ad1s1a: UDMA ICRC error reading fsbn 580959 of 290448-290575 (ad1s1a
bn 580959; 
cn 36 tn 5 sn 36) retrying
ad1s1a: UDMA ICRC error reading fsbn 586687 of 293312-293439 (ad1s1a
bn 586687; 
cn 36 tn 96 sn 31) retrying
ad1s1a: UDMA ICRC error reading fsbn 586687 of 293312-293439 (ad1s1a
bn 586687; 
cn 36 tn 96 sn 31) retrying
ad1s1a: UDMA ICRC error reading fsbn 586687 of 293312-293439 (ad1s1a
bn 586687;
cn 36 tn 96 sn 31) retrying
ad1s1a: UDMA ICRC error reading fsbn 586687 of 293312-293439 (ad1s1a
bn 586687; 
cn 36 tn 96 sn 31) falling back to PIO mode
IP packet filtering initialized, divert disabled, rule-based
forwarding disabled
, default to deny, logging disabled

machine         i386
cpu             I686_CPU
options         PERFMON
ident           NEPTUNE
maxusers        256

options         INET                    #InterNETworking
options         IPSEC                   #IP security
options         IPSEC_ESP               #IP security (crypto; define w/ IPSEC)
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         FDESC                   #File descriptor filesystem
options         KERNFS                  #Kernel filesystem
options         NFS                     #Network File System
options         CD9660                  #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         NSWAPDEV=8              #Number of swap devices 
options         QUOTA                   #enable disk quotas
options         SCSI_DELAY=5000         # self explanatory      
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev

device          isa
device          eisa
device          pci
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0
device          fd1     at fdc0 drive 1
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering
options         ATA_ENABLE_ATAPI_DMA    #Enable DMA on ATAPI devices

device          scbus                   #base SCSI code
device          ch                      #SCSI media changers
device          da                      #SCSI direct access devices (aka disks)
device          sa                      #SCSI tapes
device          cd                      #SCSI CD-ROMs
device          pass                    #CAM passthrough driver
device          pt                      #SCSI processor type
device          ses                     #SCSI SES/SAF-TE driver

device          sym
device          ahc

device          smbus           # Bus support, required for smb below.
device          intpm
device          smb
device          iicbus
device          iicbb
device          alpm
device          ichsmb
device          iicsmb

device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12
options         PSM_HOOKRESUME          #hook the system resume event
options         PSM_RESETAFTERSUSPEND   #reset the device at the resume event

device          vga0    at isa?
options         VGA_WIDTH90             # support 90 column modes
options         XSERVER                 # support for running an X server on vt
options         SC_PIXEL_MODE           # add support for the raster text mode
options         SC_DFLT_FONT            # compile font in
makeoptions     SC_DFLT_FONT=cp850
options         ATKBD_DFLT_KEYMAP
makeoptions     ATKBD_DFLT_KEYMAP="fr.iso.acc"
options         VESA
options         SC_HISTORY_SIZE=1024
options         SC_NORM_ATTR="(FG_CYAN|BG_BLACK)"
options         SC_NORM_REV_ATTR="(FG_BLACK|BG_BLUE)"

pseudo-device   splash
device          sc0     at isa? flags 0x100
device          npx0    at nexus? port IO_NPX irq 13
device          apm0    at nexus? disable flags 0x20 
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
device          vpo             # Requires scbus and da

device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
device          dc              # DEC/Intel 21143 and various workalikes
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device          miibus          # MII bus support

pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   bpf             #Berkeley packet filter
pseudo-device   tun
pseudo-device   disc                    #Discard device (ds0, ds1, etc)
pseudo-device   ppp                     #Point-to-point protocol
options         PPP_BSDCOMP             #PPP BSD-compress support
options         PPP_DEFLATE             #PPP zlib/deflate/gzip support
options         PPP_FILTER              #enable bpf filtering (needs bpf)
#options                MROUTING

options IPDIVERT
options IPFILTER
options DUMMYNET

options ICMP_BANDLIM            #Rate limit bad replies

pseudo-device   speaker         #Play IBM BASIC-style noises out your speaker
pseudo-device   gzip            #Exec gzipped a.out's
pseudo-device   vn              #Vnode driver (turns a file into a device)
pseudo-device   md              #Memory/malloc disk
pseudo-device   snp     4       #Snoop device - to look at pty/vty/etc..
#pseudo-device  ccd     4       #Concatenated disk driver

options         MSGBUF_SIZE=40960
#options        NSFBUFS=1024
options         NMBCLUSTERS=65536
options         PNPBIOS

device          pcm
device          sbc0    at isa? port 0x220 irq 5 drq 1 flags 0x15

Reply via email to