I have it on two machines with this chipset and it looks good so
far. After installing, dmesg shows
fxp0: <Intel Pro/100 Ethernet> port 0xc400-0xc43f mem 0xd5001000-0xd5001fff
irq 11 at device 8.0 on pci1
fxp0: *** DISABLING DYNAMIC STANDBY MODE IN EEPROM ***
fxp0: New EEPROM ID: 0x49a0
fxp0: EEPROM checksum @ 0xff: 0xe441 -> 0xe443
fxp0: *** PLEASE REBOOT THE SYSTEM NOW FOR CORRECT OPERATION ***
fxp0: Ethernet address 00:01:80:02:d0:34
inphy0: <i82562EM 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
and then one more reboot shows
fxp0: <Intel Pro/100 Ethernet> port 0xc400-0xc43f mem 0xd5001000-0xd5001fff
irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:01:80:02:d0:34
inphy0: <i82562EM 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
---Mike
At 10:11 AM 8/26/2001 -0500, Jonathan Lemon wrote:
> I believe that I have a real fix for the SCB timeout problems
>that have been plauging users of recent Intel fxp boards.
>
> If you have a board that uses the Intel ICH2/ICH2-M chipset
>(usually 815E style boards) and feel comfortable applying
>patches to the system, please contact me to test a fix.
>
> The patch works on two different boards here, but I would like
>to get some wider testing before I commit it to the tree.
>--
>Jonathan
>
>To Unsubscribe: send mail to [EMAIL PROTECTED]
>with "unsubscribe freebsd-stable" in the body of the message
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Network Administration, [EMAIL PROTECTED]
Sentex Communications www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
