Hi, Finally decided to upgrade my current box to the post-ACPI/KSE and found that I'm having problem with resource allocation for floppy disk controller. I'm sure somebody already reported this some time ago, but the problems seems still here, so I would like to see it resolved. Thanks! -Maxim
Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #23: Mon Sep 17 16:03:59 EEST 2001 root@big_brother:/usr/src/sys/i386/compile/MBSD Timecounter "i8254" frequency 1193025 Hz CPU: AMD-K6(tm) 3D processor (501.07-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 167706624 (163776K bytes) avail memory = 159588352 (155848K bytes) Preloaded elf kernel "/boot/kernel/kernel" at 0xc0346000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03460a8. K6-family MTRR support enabled (2 registers) Using $PIR table, 6 entries at 0xc00fddf0 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AWARD AWRDACPI> on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI" frequency 3579545 Hz can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_BUFFER_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 acpi_button0: <Power Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0x5080-0x50ff,0x5000-0x507f,0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 7.2 (no driver attached) ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe800-0xe81f irq 9 at device 9.0 on pci0 ed0: address 00:40:05:5b:69:33, type NE2000 (16 bit) fdc0: cannot reserve I/O port range (1 ports) sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <Hewlett-Packard HP LaserJet 1100.1.1> PRINTER MLC,PCL,PJL lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 fdc0: cannot reserve I/O port range (1 ports) psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0: cannot reserve I/O port range (6 ports) ppc1: cannot reserve I/O port range ata2: <Generic ESDI/IDE/ATA controller> at port 0x168-0x16f,0x36e-0x36f irq 10 on isa0 ad0: 4110MB <QUANTUM FIREBALL ST4.3A> [14848/9/63] at ata0-master UDMA33 ad1: 2014MB <QUANTUM FIREBALL ST2.1A> [4092/16/63] at ata1-master UDMA33 acd0: CDROM <Philips R O D 1270> at ata1-slave PIO3 Mounting root from ufs:/dev/ad1s1a