I have a Sharp AR50 laptop.  It has an Accton EN2242 MiniPCI 10/100
    NIC that's producing the following:

pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> irq 11 at device 11.0 on pci0
dc0: couldn't map ports/memory
device_probe_and_attach: dc0 attach returned 6

    I've read through the mailing lists and one other person reported
    similar failure not quite on the same lines back in March 2000.
    I don't have any PnP BIOS options -- so how long am I going to be
    out of luck for?  What's actually required to get this working?

    If I aquire a PCMCIA NIC in the interim, am I likely to have similar
    problems?

        Trent.

% uname -a
FreeBSD current.ar50.udt 5.0-CURRENT FreeBSD 5.0-CURRENT #1: Wed Oct 17 12:13:59 WST 
2001 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/current_17Oct2001 i386

% pciconf -lv
hostb0@pci0:0:0:        class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX AGPset Host Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB PIIX4 ISA Bridge'
    class    = bridge
    subclass = PCI-unknown
atapci0@pci0:7:1:       class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB PIIX4 IDE Controller'
    class    = mass storage
    subclass = ATA
none0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB PIIX4 USB Interface'
    class    = serial bus
    subclass = USB
none1@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x03 hdr=0x00    
vendor   = 'Intel Corporation'
    device   = '82371AB PIIX4 Power Management Controller'
    class    = bridge
    subclass = PCI-unknown
none2@pci0:11:0:        class=0x020000 card=0x00121468 chip=0x12161113 rev=0x11 
hdr=0x00
    vendor   = 'Accton Technology Corporation'
    class    = network
    subclass = ethernet
none3@pci0:12:0:        class=0x060700 card=0x101913bd chip=0xac42104c rev=0x00 
hdr=0x02
    vendor   = 'Texas Instruments'
    device   = 'PCI4451 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
none4@pci0:12:1:        class=0x060700 card=0x101913bd chip=0xac42104c rev=0x00 
hdr=0x02
none5@pci0:12:2:        class=0x0c0010 card=0x101913bd chip=0x8027104c rev=0x00 
hdr=0x00
    vendor   = 'Texas Instruments'
    class    = serial bus
    subclass = FireWire
none6@pci0:14:0:        class=0x040100 card=0x101913bd chip=0x1988125d rev=0x12 
hdr=0x00
    vendor   = 'ESS Technology'
    device   = 'ES1989 Allegro-1 Audiodrive'
    class    = multimedia
    subclass = audio
none7@pci0:14:1:        class=0x078000 card=0x101913bd chip=0x1989125d rev=0x12 
hdr=0x00
    vendor   = 'ESS Technology'
    device   = 'ES1989 Allegro-1.COMM ES56CVM-PI PCI Voice+Fax Modem'
    class    = simple comms
none8@pci1:0:0: class=0x030000 card=0x101913bd chip=0x4c4d1002 rev=0x64 hdr=0x00
    vendor   = 'ATI Technologies'
    device   = 'Rage P/M Mobility AGP 2x'
    class    = display
    subclass = VGA

% dmesg 
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 5.0-CURRENT #1: Wed Oct 17 12:13:59 WST 2001
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/current_17Oct2001
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 846328227 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (846.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (262080K bytes)
avail memory = 256413696 (250404K bytes)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03a8000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> irq 11 at device 11.0 on pci0
dc0: couldn't map ports/memory
device_probe_and_attach: dc0 attach returned 6
pcic0: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 12.0 on pci0
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
pcic0: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 12.1 on pci0
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
pci0: <serial bus, FireWire> at device 12.2 (no driver attached)
pci0: <multimedia, audio> at device 14.0 (no driver attached)
pci0: <simple comms> at device 14.1 (no driver attached)
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xe4000-0xe7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x80 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0700> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, 
default to accept, logging limited to 100 packets/entry by default
Profiling kernel, textsize=1509504 [c01211c0..c0291a40]
cputime 65, empty_loop 2, nullfunc_loop_profiled 167, mcount 228, mexitcount 157
Profiling overheads: mcount: 62+163, 148+76; mexitcount: 62+92, 139+15 nsec
Profiling overheads: mcount: 53+138, 126+65; mexitcount: 53+78, 118+13 cycles
ata1-slave: ATAPI identify retries exceeded
ad0: 19077MB <FUJITSU MHM2200AT> [38760/16/63] at ata0-master UDMA33
acd0: DVD-ROM <UJDA540> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s3a


-- 
Trent Nelson - Software Engineer - [EMAIL PROTECTED]
       "A man with unlimited enthusiasm can achieve 
               almost anything." --unknown 

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to