At 4:57 PM +0200 6/26/02, Sheldon Hearn wrote:
>Here's what I did to get XFree86-4 to build with the base system's
>toolchain in -CURRENT:

I thought I'd try this out.  Before starting, I did a cvsup of
all my ports tree.

>a) ports/devel/imake-4:
>    Replace files/patch-d and files/patch-xthreads with the attached
>    Add the attached patch-config::cf::bsdLib.tmpl.

In both of these, I had to change the header lines (the lines which
specify the file to patch) from:
to      cf/

I was then able to 'make patch' and 'make install' (I did a
'make extract' before touching any patches in imake-4/files).
Without changing those lines, the 'make patch' would fail.

>b) ports/x11/XFree86-4-libraries:
>    Replace files/patch-z45 with the attached patch-z45.

I made the above switch, and it compiled fine.  It then died
in the middle of my 'make install' attempt:

  - - - - -
installing in lib/GL/GL...
/usr/bin/install -c -m 0644 libGL.a /usr/X11R6/lib
ranlib  /usr/X11R6/lib/libGL.a
+ /usr/bin/install -c -m 0755 /usr/X11R6/lib/
+ true
+ rm -f /usr/X11R6/lib/
+ ln -s /usr/X11R6/lib/
install in lib/GL/GL done
installing in lib/GL/mesa/src/OSmesa...
/usr/bin/install -c -m 0644 libOSMesa.a /usr/X11R6/lib
ranlib  /usr/X11R6/lib/libOSMesa.a
rm -f ../../../../../lib/GL/mesa/src/translate.o 
LD_LIBRARY_PATH=../../../../../exports/lib cc -c -ansi -pedantic 
-Dasm=__asm -Wall -Wpointer-arith 
-I../../../../../extras/Mesa/include   -I../../../../.. 
-I../../../../../exports/include   -DCSRG_BASED  -DFUNCPROTO=15 
../../../../../lib/GL/mesa/src/translate.c -o 
Assembler messages:
FATAL: can't create 
unshared/../../../../../lib/GL/mesa/src/translate.o: No such file or 
*** Error code 1

Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib/GL/mesa/src/OSmesa.
*** Error code 1

Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib/GL.
*** Error code 1

Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
*** Error code 1

Stop in /usr/ports/x11/XFree86-4-libraries/work/xc.
*** Error code 1

Stop in /usr/ports/x11/XFree86-4-libraries/work/xc.
*** Error code 1

Stop in /usr/ports/x11/XFree86-4-libraries.
  - - - - -

(note that this means the package didn't get registered...)
I did not even try to guess what this problem might be (hey, it's
pretty late at this point!).

>c) ports/x11-servers/XFree86-4-Server:
>    Add the attached patch-gcc31, taken from Motoyuki Konno's post to
>    <[EMAIL PROTECTED]> with the following Message-ID:

I thought I'd pretend that #b worked perfectly, and try this too.
In my case, I also wanted the matrox drives, so I have
     export WITH_MATROX_GXX_DRIVER=yes

but that still died with "internal compiler error in failed_reload,
at reload1.c:5050", while compiling translate.c, while processing
included file ../../../../extras/Mesa/src/trans_tmp.h.

So, no joy in mudville just yet...

Garance Alistair Drosehn            =   [EMAIL PROTECTED]
Senior Systems Programmer           or  [EMAIL PROTECTED]
Rensselaer Polytechnic Institute    or  [EMAIL PROTECTED]

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to