I just got myself an IBM Thinkpad T30, most things work fine on -STABLE
(trying to get specs from IBM for the rest), but -CURRENT won't boot with
ACPI enabled. I'd be glad to track that down, but I have no clue where to
start, nor do I have any more than a passing knowledge of ACPI. I could
disable it and boot -CURRENT (and install works fine since there's no ACPI
there), but things go wrong as soon as the kernel touches UFS. This
happens on very recent -CURRENT as well as from two months ago (I tried
GENERIC kernel as well as customized). I'm including boot -v output here,
nothing jumped out at me except the bad wi0 memory range (works fine on
-stable) and the existence of sio1 (I don't have one, and -stable doesn't
give me one, though -current without acpi shows it as well). Please tell
me what I need to do or where I can start digging to get acpi working.
Thanks.
Yes, I know I can unset acpi_load, but where's the fun in that?
[boot -v output as attachments]
-Jon
OK unload
OK boot -v
/boot/kernel/kernel text=0x327710 data=0x4e3d4+0x82c2c syms=[0x4+0x463b0+0x4+0x53717]
/boot/kernel/acpi.ko text=0x2c71c data=0x1744+0x6e0 syms=[0x4+0x4f40+0x4+0x6780]
SMAP type=01 base=00000000 00000000 len=00000000 0009f000
SMAP type=02 base=00000000 0009f000 len=00000000 00001000
SMAP type=02 base=00000000 000d2000 len=00000000 00002000
SMAP type=02 base=00000000 000dc000 len=00000000 00024000
SMAP type=01 base=00000000 00100000 len=00000000 1fe60000
SMAP type=03 base=00000000 1ff60000 len=00000000 0001a000
SMAP type=04 base=00000000 1ff7a000 len=00000000 00002000
SMAP type=02 base=00000000 1ff7c000 len=00000000 00004000
SMAP type=02 base=00000000 1ff80000 len=00000000 00080000
SMAP type=02 base=00000000 ff800000 len=00000000 00400000
SMAP type=02 base=00000000 ffc00000 len=00000000 00400000
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT-20020707-JPSNAP #0: Sat Jul 6 22:52:25 GMT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05d0000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05d00b4.
Calibrating clock(s) ... TSC clock: 1794138564 Hz, i8254 clock: 1193155 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1794188376 Hz
CPU: Pentium 4 (1794.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536215552 (523648K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x005f7000 - 0x1ff57fff, 529928192 bytes (129377 pages)
avail memory = 514093056 (502044K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7000
bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd770+0x18e
pnpbios: Found PnP BIOS data at 0xc00f7060
pnpbios: Entry = f0000:9d6a Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
Using $PIR table, 14 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1I > on motherboard
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1351: *** Error: Method execution failed, AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
map[20]: type 4, range 32, base 00001800, size 5, enabled
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
intpin=a, irq=11
map[20]: type 4, range 32, base 00001820, size 5, enabled
found-> vendor=0x8086, dev=0x2484, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
map[20]: type 4, range 32, base 00001840, size 5, enabled
found-> vendor=0x8086, dev=0x2487, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=c, irq=11
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00001860, size 4, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
intpin=a, irq=255
map[20]: type 4, range 32, base 00001880, size 5, enabled
found-> vendor=0x8086, dev=0x2483, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xe8000000-0xefffffff
pci1: physical bus=1
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 4, range 32, base 00003000, size 8, enabled
map[18]: type 1, range 32, base d0100000, size 16, enabled
found-> vendor=0x1002, dev=0x4c57, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at
device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at
device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 8
pcib2: I/O decode 0x4000-0x8fff
pcib2: memory decode 0xd0200000-0xdfffffff
pcib2: prefetched decode 0xf0000000-0xf80fffff
pci2: physical bus=2
map[10]: type 1, range 32, base 50000000, size 12, enabled
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=2, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 51000000, size 12, enabled
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=2, slot=0, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f8000000, size 12, enabled
found-> vendor=0x1260, dev=0x3873, revid=0x01
bus=2, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0200000, size 12, enabled
map[14]: type 4, range 32, base 00008000, size 6, enabled
found-> vendor=0x8086, dev=0x1031, revid=0x42
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci2: <PCI bus> on pcib2
Found unknown YENTA PCI-CardBus Bridge devid 0xac55104c
pcic0: <YENTA PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on
pci2
pcib2: device pcic0 requested unsupported memory range 0x50000000-0x50000fff (decoding
0xd0200000-0xdfffffff, 0xf0000000-0xf80fffff)
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
Found unknown YENTA PCI-CardBus Bridge devid 0xac55104c
pcic0: <YENTA PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on
pci2
pcib2: device pcic0 requested unsupported memory range 0x51000000-0x51000fff (decoding
0xd0200000-0xdfffffff, 0xf0000000-0xf80fffff)
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci2
pcib2: device wi0 requested unsupported memory range 0x0-0xdfffffff (decoding
0xd0200000-0xdfffffff, 0xf0000000-0xf80fffff)
wi0: No Mem space on prism2.5?
device_probe_and_attach: wi0 attach returned 6
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at
device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xd0200000-0xd0200fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:09:6b:10:6e:10
fxp0: PCI IDs: 8086 1031 1014 0209 0042
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1860
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1868
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
unknown: not probed (disabled)
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
adv0 failed to probe on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
pcic1: not probed (disabled)
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
bpf: ppp0 attached
bpf: lo0 attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acpi_acad0: On Line
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK4019GAX/FA003B> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <UJDA720 DVD/CDRW/1.03> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s3a
ad0s1: type 0x7, start 63, end = 8195039, size 8194977 : OK
ad0s2: type 0xa5, start 8195040, end = 14484959, size 6289920 : OK
ad0s3: type 0xa5, start 14484960, end = 45934559, size 31449600 : OK
start_init: trying /sbin/init
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x73cc3068
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc02622ec
stack pointer = 0x10:0xd68cb698
frame pointer = 0x10:0xd68cb6a0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 1 (swapper)
kernel: type 12 trap, code=0
Stopped at crfree+0x8: movl 0x68(%esi),%ebx
db> trace
crfree(73cc3000,c04aa2e0,5,0,d68cb6e4) at crfree+0x8
getnewbuf(0,0,800,4000,4000) at getnewbuf+0x187
getblk(c4236a00,0,0,800,0) at getblk+0x269
breadn(c4236a00,0,0,800,0) at breadn+0x2f
bread(c4236a00,0,0,800,0) at bread+0x20
ffs_blkatoff(c4236a00,0,0,0,d68cb848) at ffs_blkatoff+0xb2
ufs_lookup(d68cb970,d68cb9ac,c029c751,d68cb970,c4236e74) at ufs_lookup+0x32a
ufs_vnoperate(d68cb970) at ufs_vnoperate+0x13
vfs_cache_lookup(d68cba14,d68cba40,c02a0070,d68cba14,c1584f00) at
vfs_cache_lookup+0x289
ufs_vnoperate(d68cba14) at ufs_vnoperate+0x13
lookup(d68cbc58,c1584f00,11000,d68cbd00,d68cba70) at lookup+0x2c0
namei(d68cbc58,c,c036d4f1,c08399a8,c0456280) at namei+0x1e4
execve(c1584f00,d68cbd00,bfbfffe4,bfbffff2,bfbfffe8,bfbffffd,bfbfffec,0) at
execve+0x219
start_init(0,d68cbd48,c1584f00,c0248bac,0) at start_init+0x353
fork_exit(c0248bac,0,d68cbd48) at fork_exit+0xa8
fork_trampoline() at fork_trampoline+0x37
db>
OK unset acpi_load
OK unload
OK load /boot/kernel.20020515.debug
/boot/kernel.20020515.debug text=0x2ee1e8 data=0x4cbb4+0x824ac
syms=[0x4+0x46ba0+0x4+0x52ca2]
OK load /boot/acpi.20020515.ko
/boot/acpi.20020515.ko text=0x2b67c data=0x16e4+0x6e0 syms=[0x4+0x4f10+0x4+0x6728]
OK boot -v
SMAP type=01 base=00000000 00000000 len=00000000 0009f000
SMAP type=02 base=00000000 0009f000 len=00000000 00001000
SMAP type=02 base=00000000 000d2000 len=00000000 00002000
SMAP type=02 base=00000000 000dc000 len=00000000 00024000
SMAP type=01 base=00000000 00100000 len=00000000 1fe60000
SMAP type=03 base=00000000 1ff60000 len=00000000 0001a000
SMAP type=04 base=00000000 1ff7a000 len=00000000 00002000
SMAP type=02 base=00000000 1ff7c000 len=00000000 00004000
SMAP type=02 base=00000000 1ff80000 len=00000000 00080000
SMAP type=02 base=00000000 ff800000 len=00000000 00400000
SMAP type=02 base=00000000 ffc00000 len=00000000 00400000
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT-20020515-JPSNAP #0: Tue May 14 23:06:39 GMT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel.20020515.debug" at 0xc0593000.
Preloaded elf module "/boot/acpi.20020515.ko" at 0xc05930bc.
Calibrating clock(s) ... TSC clock: 1794136564 Hz, i8254 clock: 1193154 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1794184496 Hz
CPU: Pentium 4 (1794.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536215552 (523648K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x005ba000 - 0x1ff57fff, 530178048 bytes (129438 pages)
avail memory = 515469312 (503388K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7000
bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd770+0x18e
pnpbios: Found PnP BIOS data at 0xc00f7060
pnpbios: Entry = f0000:9d6a Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
random: <entropy source>
mem: <memory & I/O>
null: <null device, zero device>
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
Using $PIR table, 14 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1I > on motherboard
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1305: *** Error: Method execution failed, AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
map[20]: type 4, range 32, base 00001800, size 5, enabled
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
intpin=a, irq=11
map[20]: type 4, range 32, base 00001820, size 5, enabled
found-> vendor=0x8086, dev=0x2484, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
map[20]: type 4, range 32, base 00001840, size 5, enabled
found-> vendor=0x8086, dev=0x2487, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=c, irq=11
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00001860, size 4, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
intpin=a, irq=255
map[20]: type 4, range 32, base 00001880, size 5, enabled
found-> vendor=0x8086, dev=0x2483, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
intpin=b, irq=11
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xe8000000-0xefffffff
pci1: physical bus=1
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 4, range 32, base 00003000, size 8, enabled
map[18]: type 1, range 32, base d0100000, size 16, enabled
found-> vendor=0x1002, dev=0x4c57, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at
device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at
device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 8
pcib2: I/O decode 0x4000-0x8fff
pcib2: memory decode 0xd0200000-0xdfffffff
pcib2: prefetched decode 0xf0000000-0xf80fffff
pci2: physical bus=2
map[10]: type 1, range 32, base 50000000, size 12, enabled
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=2, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 51000000, size 12, enabled
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=2, slot=0, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f8000000, size 12, enabled
found-> vendor=0x1260, dev=0x3873, revid=0x01
bus=2, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0200000, size 12, enabled
map[14]: type 4, range 32, base 00008000, size 6, enabled
found-> vendor=0x8086, dev=0x1031, revid=0x42
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci2: <PCI bus> on pcib2
Found unknown YENTA PCI-CardBus Bridge devid 0xac55104c
pcic0: <YENTA PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on
pci2
pcib2: device pcic0 requested unsupported memory range 0x50000000-0x50000fff (decoding
0xd0200000-0xdfffffff, 0xf0000000-0xf80fffff)
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
Found unknown YENTA PCI-CardBus Bridge devid 0xac55104c
pcic0: <YENTA PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on
pci2
pcib2: device pcic0 requested unsupported memory range 0x51000000-0x51000fff (decoding
0xd0200000-0xdfffffff, 0xf0000000-0xf80fffff)
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci2
pcib2: device wi0 requested unsupported memory range 0x0-0xdfffffff (decoding
0xd0200000-0xdfffffff, 0xf0000000-0xf80fffff)
wi0: No Mem space on prism2.5?
device_probe_and_attach: wi0 attach returned 6
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at
device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xd0200000-0xd0200fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:09:6b:10:6e:10
fxp0: PCI IDs: 8086 1031 1014 0209 0042
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1860
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1868
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
unknown: not probed (disabled)
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
adv0 failed to probe on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
pcic1: not probed (disabled)
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
bpf: ppp0 attached
bpf: lo0 attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acpi_acad0: On Line
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK4019GAX/FA003B> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <UJDA720 DVD/CDRW/1.03> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s3a
ad0s1: type 0x7, start 63, end = 8195039, size 8194977 : OK
ad0s2: type 0xa5, start 8195040, end = 14484959, size 6289920 : OK
ad0s3: type 0xa5, start 14484960, end = 45934559, size 31449600 : OK
dscheck(ad0s3a): negative bio_blkno 4256
start_init: trying /sbin/init
dscheck(ad0s3a): negative bio_blkno 4256
exec /sbin/init: error 22
start_init: trying /sbin/oinit
dscheck(ad0s3a): negative bio_blkno 4256
exec /sbin/oinit: error 22
start_init: trying /sbin/init.bak
dscheck(ad0s3a): negative bio_blkno 4256
exec /sbin/init.bak: error 22
start_init: trying /stand/sysinstall
dscheck(ad0s3a): negative bio_blkno 4256
exec /stand/sysinstall: error 22
init: not found in path /sbin/init:/sbin/oinit:/sbin/init.bak:/stand/sysinstall
panic: no init
Debugger("panic")
Stopped at Debugger+0x45: xchgl %ebx,in_Debugger.0
db> trace
Debugger(c03c0e1c) at Debugger+0x45
panic(c03bd269,c03bd24d,c0417720,1,d689f100) at panic+0x71
start_init(0,d68a6d48,d689f100,c022e150,0) at start_init+0x395
fork_exit(c022e150,0,d68a6d48) at fork_exit+0x88
fork_trampoline() at fork_trampoline+0x37
db>
