On Sun, Jul 28, 2002 at 04:24:41PM -0700, Lamont Granquist wrote: > > I cvsup'd and built last night around midnight and now I can reliably > induce a freeze by firing up X and trying to load a page in mozilla > (firing up mozilla doesn't do it, but the first page i try to load kills > it). I get no crash dumps, and have to physically power the machine down. > > Attatched is a dmesg from my machine. I'm running: > > Mozilla 1.0 Release Candidate 2 > > XFree86 Version 4.2.0 / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 18 January 2002 > > sawfish version 1.0.1 > > I'm not sure how to find my gnome version... >
Do you have INET6 defined in your kernel config? If so, take it out and build a new kernel. This fixed very simialr problems that I was having. I posted details to this list a few days ago and was met with silence =-( Scott > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.0-CURRENT #9: Sun Jul 28 00:46:20 PDT 2002 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/COREDUMP > Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ae000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04ae0a8. > Timecounter "i8254" frequency 1193182 Hz > CPU: AMD Athlon(TM) XP 1600+ (1400.06-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 > >Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xffffffffc0480000<MP,AMIE,DSP,3DNow!> > real memory = 536788992 (524208K bytes) > avail memory = 515735552 (503648K bytes) > Programming 24 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq 0 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000 > io0 (APIC): apic id: 2,version: 0x00170011, at 0xfec00000 > Pentium Pro MTRR support enabled > Using $PIR table, 9 entries at 0xc00f1370 > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS A7M266-D> on motherboard > acpi0: power button is handled as a fixed feature programming model. > acpi0: sleep button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <PCI bus> on acpi_pcib0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 5.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <AMD 768 ATA100 controller> port 0xd800-0xd80f at device 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) > ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd400-0xd4ff mem >0xed800000-0xed800fff irq 10 at device 9.0 on pci0 > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd000-0xd0ff mem >0xed000000-0xed000fff irq 5 at device 9.1 on pci0 > aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs > pcib2: <PCI-PCI bridge> at device 16.0 on pci0 > pci2: <PCI bus> on pcib2 > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem >0xeb800000-0xeb8fffff,0xec000000-0xec000fff irq 10 at device 6.0 on pci2 > fxp0: Ethernet address 00:90:27:bc:09:95 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci2: <multimedia, audio> at device 8.0 (no driver attached) > pci2: <input device> at device 8.1 (no driver attached) > ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > orm0: <Option ROMs> at iomem 0xd8000-0xd8fff,0xc0000-0xcc7ff on isa0 > fdc0: cannot reserve I/O port range (6 ports) > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via IOAPIC #0 intpin 2 > acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% > ad0: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata0-master UDMA66 > acd0: DVD-ROM <CREATIVEDVD8400E> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > SMP: AP CPU #1 Launched! > cd0 at ahc0 bus 0 target 4 lun 0 > cd0: <PLEXTOR CD-R PX-W1210S 1.01> Removable CD-ROM SCSI-2 device > cd0: 20.000MB/s transfers (20.000MHz, offset 16) > cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed > da0 at ahc0 bus 0 target 0 lun 0 > da0: <SEAGATE ST336704LW 0004> Fixed Direct Access SCSI-3 device > da0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled > da0: 35003MB (71687369 512 byte sectors: 255H 63S/T 4462C) > WARNING: / was not properly dismounted > /: mount pending error: blocks 2 files 0 > /: reload pending error: blocks 2 files 0 > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.0-CURRENT #8: Wed Jul 17 23:03:58 PDT 2002 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/COREDUMP > Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc05c0000. > Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc05c00ac. > Timecounter "i8254" frequency 1193182 Hz > CPU: AMD Athlon(TM) XP 1600+ (1400.06-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 > >Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xffffffffc0480000<MP,AMIE,DSP,3DNow!> > real memory = 536788992 (524208K bytes) > avail memory = 514605056 (502544K bytes) > Programming 24 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq 0 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 > Pentium Pro MTRR support enabled > Using $PIR table, 9 entries at 0xc00f1370 > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS A7M266-D> on motherboard > acpi0: power button is handled as a fixed feature programming model. > acpi0: sleep button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <PCI bus> on acpi_pcib0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 5.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <AMD 768 ATA100 controller> port 0xd800-0xd80f at device 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) > ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd400-0xd4ff mem >0xed800000-0xed800fff irq 10 at device 9.0 on pci0 > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd000-0xd0ff mem >0xed000000-0xed000fff irq 5 at device 9.1 on pci0 > aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs > pcib2: <PCI-PCI bridge> at device 16.0 on pci0 > pci2: <PCI bus> on pcib2 > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem >0xeb800000-0xeb8fffff,0xec000000-0xec000fff irq 10 at device 6.0 on pci2 > fxp0: Ethernet address 00:90:27:bc:09:95 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci2: <multimedia, audio> at device 8.0 (no driver attached) > pci2: <input device> at device 8.1 (no driver attached) > ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > orm0: <Option ROMs> at iomem 0xd8000-0xd8fff,0xc0000-0xcc7ff on isa0 > fdc0: cannot reserve I/O port range (6 ports) > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via IOAPIC #0 intpin 2 > acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% > ad0: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata0-master UDMA66 > acd0: DVD-ROM <CREATIVEDVD8400E> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > SMP: AP CPU #1 Launched! > cd0 at ahc0 bus 0 target 4 lun 0 > cd0: <PLEXTOR CD-R PX-W1210S 1.01> Removable CD-ROM SCSI-2 device > cd0: 20.000MB/s transfers (20.000MHz, offset 16) > cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed > da0 at ahc0 bus 0 target 0 lun 0 > da0: <SEAGATE ST336704LW 0004> Fixed Direct Access SCSI-3 device > da0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled > da0: 35003MB (71687369 512 byte sectors: 255H 63S/T 4462C) > /: mount pending error: blocks 2 files 0 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
