Hi Nate,

here's my dmesg:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Aug 19 22:50:47 CEST 2002
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ODIN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0460000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04600a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 700033141 Hz
CPU: AMD Athlon(tm) Processor (700.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x622  Stepping = 2
  AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!>
real memory  = 671023104 (655296K bytes)
avail memory = 645595136 (630464K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fde50
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VT8371 AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 
0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xa000-0xa00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <serial bus, USB> at device 7.3 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xdf000000-0xdf0000ff irq 11 
at device 9.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:50:fc:3b:58:24
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xb000-0xb01f irq 10 at device 13.0 on pci0
rl1: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xdf001000-0xdf0010ff irq 10 
at device 15.0 on pci0
rl1: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl1: Ethernet address: 00:50:fc:3b:b1:fa
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT370 ATA100 controller> port 
0xcc00-0xccff,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07 irq 11 at device 
19.0 on pci0
ata2: at 0xbc00 on atapci1
ata3: at 0xc400 on atapci1
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, 
logging disabled
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata0-master PIO4
Mounting root from ufs:/dev/ad4s1a

On Tue, Aug 20, 2002 at 04:05:44PM -0700, Nate Lawson wrote:
> BTW, just a hunch:  try reverting sys/dev/pci/pci.c to 1.194 and see if
> that helps.  Looks like the current version of psm.c is requesting a
> shared interrupt (RF_SHAREABLE).

I'll currently build a world with pci.c version 1.194 and try it again!


> -Nate
> On Tue, 20 Aug 2002, Nate Lawson wrote:
> > Nothing has changed in moused or sys/isa/psm.c for at least 5 months so
> > this may be a more general problem.  How about a dmesg?
> > 
> > Please keep -current in the cc: so everyone can benefit.
> > 
> > On Wed, 21 Aug 2002, Anselm Garbe wrote:
> > > On Tue, Aug 20, 2002 at 01:37:34PM -0700, Nate Lawson wrote:
> > > > Are you using /dev/psm0 directly in X or with moused or with XKBD?
> > > > 
> > > 
> > > I'm using moused - the problem isn't X related at all.
> > > 
> > > Here's my configuration:
> > > 
> > > ---[rc.conf]---
> > > [...]
> > > moused_port="/dev/psm0"
> > > moused_type="auto"
> > > moused_enable="YES"
> > > ----
> > > 
> > > /boot/device.hints is identical to current GENERIC.hints
> > > 
> > > Anselm
> > > 
> > 
> > 
> > 
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-current" in the body of the message
> > 

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to