With DP-2 my 2nd ether won't config
( but I've got other FreeBSDs right in the past with 2 ether
cards. the mail gate on another box, relaying this mail has
DSL+ether & Internal net+ether)
Any know why some devices get conf'd as inet6 + inet & some just as inet6 ?
Could that be part of the problem ?
If I boot with /etc/rc.conf
ifconfig_fxp0="inet 192.168.53.47 netmask 255.255.255.0"
# ifconfig_ed1="inet 192.168.53.39 netmask 255.255.255.0"
# network_interfaces="auto" # default
I see:
ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.53.47 netmask 0xffffff00 broadcast 192.168.53.255
inet6 fe80::2a0:c9ff:fe9c:e0a5%fxp0 prefixlen 64 scopeid 0x1
ether 00:a0:c9:9c:e0:a5
media: Ethernet autoselect (10baseT/UTP)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
ed1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:00:b4:36:a5:04
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
ifconfig ed1 inet 192.168.53.39
ifconfig: ioctl (SIOCAIFADDR): File exists
ifconfig ed1 192.168.53.39
ifconfig: ioctl (SIOCAIFADDR): File exists
ifconfig lp0 10.0.0.1 10.0.0.2
works ok
If I boot with /etc/rc.conf
ifconfig_fxp0="inet 192.168.53.47 netmask 255.255.255.0"
ifconfig_ed1="inet 192.168.53.39 netmask 255.255.255.0"
I see:
ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.53.47 netmask 0xffffff00 broadcast 192.168.53.255
inet6 fe80::2a0:c9ff:fe9c:e0a5%fxp0 prefixlen 64 scopeid 0x1
ether 00:a0:c9:9c:e0:a5
media: Ethernet autoselect (10baseT/UTP)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::200:b4ff:fe36:a504%ed1 prefixlen 64 scopeid 0x3
ether 00:00:b4:36:a5:04
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
If I boot with /etc/rc.conf
ifconfig_ed1="inet 192.168.53.47 netmask 255.255.255.0"
ifconfig_fxp0="inet 192.168.53.39 netmask 255.255.255.0"
I see:
ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.53.39 netmask 0xffffff00 broadcast 192.168.53.255
inet6 fe80::2a0:c9ff:fe9c:e0a5%fxp0 prefixlen 64 scopeid 0x1
ether 00:a0:c9:9c:e0:a5
media: Ethernet autoselect (10baseT/UTP)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::200:b4ff:fe36:a504%ed1 prefixlen 64 scopeid 0x3
ether 00:00:b4:36:a5:04
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
It could be my BIOS isnt right (as the ed1 is an ISA card),
dmesg:
ed1: <PLUG & PLAY ETHERNET CARD> at port 0x240-0x25f iomem 0xc0000-0xc3fff irq
10 on isa0
ed1: address 00:00:b4:36:a5:04, type NE2000 (16 bit)
bios:
irq 10 allocated to ISA bus,
PNP OS was off. tried on, made no difference.
But I think even if the BIOS is wrong somewhere,
there's perhaps more to fix on FreeBSD side ?
Any Ideas ?
PS I'ts not actually using 192.168.53 but 192.168.??,
but changed for email to protect `the innoocent` :-)
Julian Stacey
jhs @ berklix.com Computer Systems Engineer, Unix & Net Consultant, Munich.
Ihr Rauchen => mein allergischer Kopfschmerz ! Schnupftabak probieren.
Munich BSD Conference: http://berklix.org/conf/
Spam phrases triggering deletion: http://berklix.com/jhs/mail/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
