Hi Max,
Kernel recompiled and now no more "_mtx_assert undefined" errors.
Continuing with the directions at <http://www.oook.cz/bsd/bluetooth.html>:
When I press the T30's bluetooth button I get the known USB problem,
but never see the ubt0 device defined. Instead of getting
ubt0: vendor 0x0a12 product 0x0001, rev 1.10/5.25, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, buffer size=294
I get dead silence. Grep'ing for it in dmesg renders:
: || tylendel.castle.org [8] ; dmesg | grep ubt
Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc06e60a8.
I am presuming pressing the bluetooth button is like adding a bluetooth
USB device but I am lacking in actual real knowledge here. Their
documentation has things like "Power on the BDC by pressing Bluetooth power
switch if the Bluetooth LED is off." (BDC = Bluetooth Daughter Card).
When I press the button the LED does not come on. If I press and
hold the button the LED will eventually flash once and then I get the
"uhub2: device problem, disabling port 1" message on the console yet again.
In searching IBM's documentation I found that they have updated firmware
for the BDC, but you have to be running windows to install it. :/
Kernel source was sup'd Monday evening, US Pacific time. Bluetooth
bundle is ngbt-fbsd-20030305.tar.gz.
I went ahead and tried to run rc.bluetooth start ubt0 in debug mode
and got pretty much what you'd expect when the device isn't there:
+ logger=/usr/bin/logger -i -s -p user.err
+ kldstat=/sbin/kldstat
+ kldload=/sbin/kldload
+ sysctl=/sbin/sysctl
+ ngctl=/usr/sbin/ngctl
+ hcseriald=/usr/sbin/hcseriald
+ hccontrol=/usr/sbin/hccontrol
+ hci_debug_level=3
+ l2cap_debug_level=3
+ [ 2 -lt 2 ]
+ startstop=start
+ shift
+ dev=ubt0
+ shift
+ load_module ng_bluetooth
+ module=ng_bluetooth
+ shift
+ /sbin/kldstat -n ng_bluetooth
+ [ 1 -ne 0 ]
+ /sbin/kldload ng_bluetooth
+ [ 0 -ne 0 ]
+ load_module ng_hci
+ module=ng_hci
+ shift
+ /sbin/kldstat -n ng_hci
+ [ 1 -ne 0 ]
+ /sbin/kldload ng_hci
+ [ 0 -ne 0 ]
+ load_module ng_l2cap
+ module=ng_l2cap
+ shift
+ /sbin/kldstat -n ng_l2cap
+ [ 1 -ne 0 ]
+ /sbin/kldload ng_l2cap
+ [ 0 -ne 0 ]
+ load_module ng_btsocket
+ module=ng_btsocket
+ shift
+ /sbin/kldstat -n ng_btsocket
+ [ 1 -ne 0 ]
+ /sbin/kldload ng_btsocket
+ [ 0 -ne 0 ]
+ ./src/share/examples/netgraph/bluetooth/rc.bluetooth stop ubt0
+ hook=hook
+ expr ubt0 : ubt\([0-9]\{1,\}\)
+ unit=0
+ [ -z 0 ]
+ setup_stack ubt0 hook
+ dev=ubt0
+ shift
+ hook=hook
+ shift
+ /usr/sbin/ngctl mkpeer ubt0: hci hook drv
ngctl: send msg: No such file or directory
+ exit 1
nomad
> Lee Damon wrote:
> > first pass at trying to follow Pav's directions. I get as far as trying
> > to run rc.bluetooth and get the following in syslog:
> >
> > Mar 26 11:18:34 tylendel kernel: link_elf: symbol _mtx_assert undefined
> > Mar 26 11:18:34 tylendel nomad[576]: Failed to load ng_btsocket
>
> your kernel options do not match options in Makefile. please
>
> 1) edit snapshot Makefile's for the modules and remove
> -DWITNESSxxx and -DINVARIANTxxx
>
> or
>
> 2) add options WITNESS, options WITNESS_SKIPSPIN,
> options INVARIANTS and options INVARIANTS_SUPPORT to
> your kernel config.
>
> this is an intergration issue. i use this option to catch
> locking bugs. once code is commited this will be resolved
> automatically. some people choose to disable them because
> it improves performance.
>
> thanks,
> max
>
nomad
----------- - Lee "nomad" Damon - \
play: [EMAIL PROTECTED] or castle!nomad \
work: [EMAIL PROTECTED] \
/\
Seneschal, Castle PAUS. / \
"Celebrate Diversity" / \
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
