;), Mon, Sep 01, 2003 at 01:16:00PM +0200, Soren Schmidt said that > > I've gone over the probe code once again. > > Please test, and in case it fails to detect or misdetects anything, > mail me the output of dmesg from a verbose boot, and state what > devices actually are there. > > Thanks! > > -Søren
hi problems still continued: [...] ATA_IDENTIFY recovered from missing interupt ATA_IDENTIFY status=1<ERROR> error=4<ABORTED> [...] in circle then i boot kernel from May 19 2003 see my previous mail to this mailing list for detail dmesg attached bye and have a nice day -- Archeologists near mount Sinai have discovered what is believed to be a missing page from the Bible. The page is currently being carbon dated in Bonn. If genuine it belongs at the beginning of the Bible and is believed to read "To my darling Candy. All characters portrayed within this book are fictitous and any resemblance to persons living or dead is purely coincidental." The page has been universally condemned by church leaders. RED DWARF Series II Episode 2, "Better Than Life" - R
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-BETA #32: Mon May 19 15:01:33 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/angel Preloaded elf kernel "/boot.okay/kernel.old/kernel" at 0xc04f8000. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 927106952 Hz CPU: Intel Pentium III (927.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268435456 (256 MB) avail memory = 255422464 (243 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00ede90 pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1800-0x183f mem 0xb1000000-0xb10fffff,0xb1100000-0xb1100fff irq 11 at device 5.0 on pci1 fxp0: Ethernet address 00:50:8b:e9:e8:92 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: <display, VGA> at device 6.0 (no driver attached) pci1: <base peripheral> at device 7.0 (no driver attached) atapci0: <CMD 649 UDMA100 controller> port 0x1840-0x184f,0x1864-0x1867,0x1858-0x185f,0x1860-0x1863,0x1850-0x1857 irq 10 at device 8.0 on pci1 ata2: at 0x1850 on atapci0 ata3: at 0x1858 on atapci0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xb1500000-0xb150007f irq 11 at device 4.0 on pci0 xl0: Ethernet address: 00:04:76:9d:0c:cd miibus1: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> port 0xfc00-0xfc0f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <ServerWorks ROSB4 UDMA33 controller> port 0x2080-0x208f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 pci0: <serial bus, USB> at device 15.2 (no driver attached) pcib5: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 5 on motherboard pci5: <PCI bus> on pcib5 orm0: <Option ROMs> at iomem 0xe8000-0xeffff,0xd2000-0xdcfff,0xd0000-0xd07ff,0xc8000-0xcffff,0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) Timecounters tick every 10.000 msec ata0-slave: timeout waiting for interrupt ata0-slave: ATA identify failed ad4: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata2-master UDMA100 ad5: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata2-slave UDMA100 ata0-master: <Compaq CRD-8402B/1.03> - NO DRIVER! Mounting root from ufs:/dev/ad4s1a WARNING: /export was not properly dismounted WARNING: /root was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted WARNING: /backhome was not properly dismounted WARNING: /var/mail was not properly dismounted WARNING: /var/www was not properly dismounted
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"