On Tue, 18 Nov 2003, Andy Farkas wrote: > My EISA AHA2740's don't work no more :( > > # grep ahc /var/run/dmesg.boot > ahc0: <Adaptec 274X SCSI adapter> at 0x2c00-0x2cff, irq 10 (level) > ahc0: on eisa0 slot 2 > ahc1: <Adaptec 274X SCSI adapter> at 0x4c00-0x4cff, irq 11 (level) > ahc1: on eisa0 slot 4 > ahc2: <Adaptec aic7880 Ultra SCSI adapter> port 0xf800-0xf8ff mem > 0xf68fb000-0xf68fbfff irq 17 at device 11.0 on pci1 > ahc2: Using left over BIOS settings > ahc3: <Adaptec aic7880 Ultra SCSI adapter> port 0xf400-0xf4ff mem > 0xf68fa000-0xf68fafff irq 18 at device 12.0 on pci1 > ahc3: Using left over BIOS settings > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0x0 > fault code = supervisor write, page not present > instruction pointer = 0x8:0xc0649083 > stack pointer = 0x10:0xd763ac5c > frame pointer = 0x10:0xd763ac84 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = resume, IOPL = 0 > current process = 14 (idle: cpu0) > kernel: type 12 trap, code=0 > Stopped at intr_execute_handlers+0x23: lock addl %eax,0(%edx) > db> tr > intr_execute_handlers(c06d5084,d763ac9c,d763ace0,c065bbae,7) at > intr_execute_handlers+0x23 > atpic_handle_intr(7) at atpic_handle_intr+0x42 > Xatpic_intr7() at Xatpic_intr7+0x1e > --- interrupt, eip = 0xc064d655, esp = 0xd763ace0, ebp = 0xd763ace0 ---
This is almost certainly addressed by jhb's atpic patch. -Nate _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
