Buganini wrote: > Hi, I got a Lenovo G450 with > siba_b...@pci0:4:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4 > rev=0x01 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'Broadcom Wireless b/g (BCM4315/BCM22062000)' > class = network > > > 4315 is not in supported list, but however the driver took the device > bwn_v4_lp_ucode.ko was not loaded automatically, so I loaded it > manually ifconfig scan seem freeze, I can `ifconfig list scan` later > and found access point correctly, but I can't associate with them, it > just keep scanning channels.
I found that if I 'ifconfig wlan0 destroy' followed by 'ifconfig wlan0 create wlandev bwn0' it works. /etc/rc.conf: --- wlans_bwn0="wlan0" ifconfig_wlan0="WPA DHCP" --- The corollery is that it doesn't work first time on reboot. I need to either '/etc/rc.d/netif restart' and if that panics the machine, destroy wlan0 and then restart netif. Then wlan0/bwn0 associates correctly with this device. Ian -- Ian Freislich _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"