I tried with delay 12000, 6000, 8000 (I admit that i really don't know how this delay helps) but no use... only putting a CD in the drive while booting helps.
-biju -----Original Message----- From: owner-freebsd-hack...@freebsd.org [mailto:owner-freebsd-hack...@freebsd.org]on Behalf Of Cillian Sharkey Sent: Tuesday, August 03, 1999 4:28 PM To: b...@wipinfo.soft.net Cc: hack...@freebsd.org Subject: Re: IDE quirk in 3.2-STABLE kernel ? > Yes, i'm also facing the same problem in 3.2 stable (wdc1 not found at 0x170). > When i put a CD-ROM (ATAPI, secondary slave) sometimes the controller comes up > ;) I tried my own kernel (by changing the IDE delay), it didn't work. > -biju Normally for my own kernel, I set the IDE delay very low (IDEDELAY=1000 in conf file) to speed up booting..I'll try increasing this for my 3.2-STABLE kernel, reboot and see if it detects wdc1 + wd2...Otherwise there must be something changed between 3.1-RELEASE generic and 3.2-STABLE ?? Cheers, - Cillian To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-hackers" in the body of the message To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-hackers" in the body of the message
