Looks like both the NetRaid firmware and the `sym' driver are in love with
the 895. If I am right, such an evil competition obviously disallows both
of them to succeed their aim. :-)
Given this message,
> Symbios,Inc.Pci boot Rom ,no supported devices found.
The Symbios BIOS seems to detect the situation just fine and discard the
895.
For now, I donnot know how it does, but may-be Pamela knows.
Grard.
On Wed, 8 Nov 2000, oneflower wrote:
> Hello,every one:
>
> I have meet a problem when I am installing FreeBSD 4.1.1 on HP LPR.
>
> HP LPR:
>
> cpu: PIII 650MHZ *2
> memory:384MB
> Disk : 9G scsi-2 *2
> Scsi card: HP NetRaid 1si
> scsi card without raid (HP)
>
> PhoenixBIOS 4.06.34 PR
> Symbios,Inc.SDMS (TM) v4.0 PCI SCSI BIOS,PCI Rev. 2.0 ,2.1
> Copyright 1995 ,1998 Symbios,Inc.
> PCI-4.14.04
>
> Symbios,Inc.Pci boot Rom ,no supported devices found.
>
> HP NetRAID Adapter BIOS VER B.02.02 Apr 03,2000
> Copyright(c) American MegaTrends,Inc.
>
>
>
> the install process stop at this screen:
>
> "..........................................
> fxp0:<Inter pro 10/100B/100+ Ethernet> port 0x9400-0x943f mem 0xfa100000-0xfa1fffff,
> 0xfa200000-0xfa2fffff irq 11 at device 3.0 on pci1
> fxp0: Ethernet address 00:d0:b7:91:20:d2
> sym0: <895> port 0x9000-0x90ff mem 0xfa201000-0xfa201fff,0xfa202000-0xfa2020ff
> irq 15 at device 4.0 on pci1"
>
>
> after a long time ,it repeated messages on screen like :
>
> ".......
> (noperiph: sym0:0:-1:-1): SCSI BUS mode change from SE to SE
> sym0:0:iph:sym OUT phase after..........."
>
>
>
> What problem? Who can help me?
>
> The Lpr can be installed with windows 2000 Adv Server,run well but boot windows
> needs a lot of time.
> I can't install Redhat 7.0 on it ,too.
> It stoped at load scsi driver.
>
>
> Best Regards,
>
> Flower
> N'r{ٚ[h&kyR+ryy)w*z
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message