Olivier SMEDTS wrote: > Hello, > > 2009/1/10 Aryeh M. Friedman <[email protected]>: > >> I just got a i45 based motherboard and everything works except for the >> following pci: >> >> no...@pci0:1:0:0: class=0x020000 card=0x83671043 chip=0x816810ec >> rev=0x02 hdr=0x00 >> vendor = 'Realtek Semiconductor' >> device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' >> class = network >> subclass = ethernet >> > > This does not seem to be related to the Intel ICH10 chipsets. This > must be a second network adapter on your motherboard. For information, > my ASUS P5Q3 (Intel ICH10 too) works very well, everything is > detected. The two network controllers are a "88E8056 Yukon PCI-E >
Same motherboard > Gigabit Ethernet Controller" (if_msk driver) and a "Yukon > 88E8001/8003/8010 PCI Gigabit Ethernet Controller (Copper)" (if_sk > driver). > Is your watchdog detected (ichwd driver) ? > I'm also using the ichsmb driver without issues. > > See the following thread on freebsd-questions : > http://lists.freebsd.org/pipermail/freebsd-questions/2008-November/187147.html > > According to it, RTL8168/8111 should work with 7.1-RELEASE. Are you > using the if_re driver ? Try loading the if_re.ko module, as I think > it's not in the GENERIC kernel. > I am used to current where it is in GENERIC so will add it to my config I guess > Cheers > > >> does -current support it or should I stay with 7.1-RELEASE ? (i386) >> _______________________________________________ >> [email protected] mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >> To unsubscribe, send any mail to "[email protected]" >> >> > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[email protected]"
