Olivier SMEDTS wrote: > 2009/1/10 Aryeh M. Friedman <[email protected]>: > >> Olivier SMEDTS wrote: >> >>> Hello, >>> >>> 2009/1/10 Aryeh M. Friedman <[email protected]>: >>> >>> >>>> I just got a i45 based motherboard and everything works except for the >>>> following pci: >>>> >>>> no...@pci0:1:0:0: class=0x020000 card=0x83671043 chip=0x816810ec >>>> rev=0x02 hdr=0x00 >>>> vendor = 'Realtek Semiconductor' >>>> device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' >>>> class = network >>>> subclass = ethernet >>>> >>>> >>> This does not seem to be related to the Intel ICH10 chipsets. This >>> must be a second network adapter on your motherboard. For information, >>> my ASUS P5Q3 (Intel ICH10 too) works very well, everything is >>> detected. The two network controllers are a "88E8056 Yukon PCI-E >>> >>> >> Same motherboard >> > > ASUS P5Q3 or P5Q3 Deluxe ? I've got the Deluxe one, maybe the ethernet > controllers are different. The only thing not working on mine is the > integrated 802.11n wireless controller. It's a Ralink chipset (don't > remember which one) attached to the USB bus. There's a linux driver > available. >
I assume deluxe but I do not have access to the machine physically right now but it was bought earlier this week and my boss asked if I wanted deluxe or not (he bought it) > >>> Gigabit Ethernet Controller" (if_msk driver) and a "Yukon >>> 88E8001/8003/8010 PCI Gigabit Ethernet Controller (Copper)" (if_sk >>> driver). >>> Is your watchdog detected (ichwd driver) ? >>> I'm also using the ichsmb driver without issues. >>> >>> See the following thread on freebsd-questions : >>> http://lists.freebsd.org/pipermail/freebsd-questions/2008-November/187147.html >>> >>> According to it, RTL8168/8111 should work with 7.1-RELEASE. Are you >>> using the if_re driver ? Try loading the if_re.ko module, as I think >>> it's not in the GENERIC kernel. >>> >>> >> I am used to current where it is in GENERIC so will add it to my config >> I guess >> I guess not: # kldstat Id Refs Address Size Name 1 3 0xc0400000 94f054 kernel 2 1 0xc0d50000 68304 acpi.ko # kldload if_re kldload: can't load if_re: File exists in the config (unmodified except setting IPI_PREMPTION): device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device re # RealTek 8139C+/8169/8169S/8110S >>> Cheers >>> >>> >>> >>>> does -current support it or should I stay with 7.1-RELEASE ? (i386) >>>> _______________________________________________ >>>> [email protected] mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >>>> To unsubscribe, send any mail to "[email protected]" >>>> >>>> >>>> >>> >> > > > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[email protected]"
