I don't really like the fact that it has to be turned on manually. Is it
possible to make this automatic based on BIOS Id or something like this?
-Maxim
Rui Paulo wrote:
I'm requesting review for the following patch:
Index: sys/i386/isa/clock.c
===================================================================
RCS file: /home/ncvs/src/sys/i386/isa/clock.c,v
retrieving revision 1.240
diff -u -p -r1.240 clock.c
--- sys/i386/isa/clock.c 26 Oct 2007 03:23:54 -0000 1.240
+++ sys/i386/isa/clock.c 7 Nov 2007 15:27:21 -0000
@@ -130,6 +130,9 @@ static u_char rtc_statusb = RTCSB_24HR;
#define ACQUIRED 2
#define ACQUIRE_PENDING 3
+/* Intel ICH register */
+#define ICH_PMBASE 0x400
+
static u_char timer2_state;
static unsigned i8254_get_timecount(struct timecounter *tc);
@@ -616,11 +619,26 @@ i8254_init(void)
void
startrtclock()
{
+ char *ichenv;
u_int delta, freq;
writertc(RTC_STATUSA, rtc_statusa);
writertc(RTC_STATUSB, RTCSB_24HR);
+ /*
+ * On some systems, namely MacBooks, we need to disallow the
+ * legacy USB circuit to generate an SMI# because this can
+ * cause several problems, namely: incorrect CPU frequency
+ * detection and failure to start the APs.
+ */
+ ichenv = getenv("hw.ich.disable_legacy_usb");
+ if (ichenv != NULL) {
+ if (bootverbose)
+ printf("Disabling LEGACY_USB_EN bit on Intel ICH.\n");
+ outl(ICH_PMBASE + 0x30, inl(ICH_PMBASE + 0x30) & ~0x8);
+ freeenv(ichsmi);
+ }
+
freq = calibrate_clocks();
#ifdef CLK_CALIBRATION_LOOP
if (bootverbose) {
If you have a MacBook, you now need to set hw.ich.disable_legacy_usb on
the boot loader prompt or in loader.conf. I decided to go this route
because it seems safer. Imagine the case where there's a port at the
same IO address that has nothing to do with the ICH7. If we tried to
issue the outl() on every system, something bad could happen.
Comments?
Regards.
--
Rui Paulo
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
