Hello Bernt!
Yes, you're right - that's interesting...
I only can state that with 7.0-RELEASE and with 7.0-STABLE-200807
(07/15/08) it doesn't work.
_But_ on 2008-07-15 there was a change made to the re driver which is
relevant for the RTL8168 as you can see here:
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/re/if_re.c
Maybe with the current if_re.c it works and to test this I could build a
new kernel from CVS but I come home not until September. :-(
The only difference between our NICs which I see is the revision. Since
the revision of your chip is 0x01, the NIC's revision on my MoBo is 0x02 ...
Maybe that's the difference?
Thanks for your statement!
Regards,
Lukas
Bernt Hansson schrieb:
Lukas Razik:
Hello!
I've a GigaByte GA-X48-DQ6 Motherboard with a "RTL8168/8111 PCI-E Gigabit
Ethernet NIC" and I've read that 7.0-RELEASE / amd64 should recognize these
cards (by the "re" driver) but it doesn't in my case.
I got an Gigabyte GA-MA790FX-DS5 with the same network chip and it's
working right out of the box. There are other issues with that motherboard.
7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64
[EMAIL PROTECTED]:2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x01
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
#uname -a :
FreeBSD 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64
#pciconf -lv :
[...]
[EMAIL PROTECTED]:4:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec
rev=0x02 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
[...]
So, does FreeBSD 7.0 work with these NICs or am I out of luck?
Regards and Many Thanks for your help!
Lukas
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"